Coral glue

[smokinreefer]

For sure.
How easy it is to remove depends,
If only glued down it should just pop off by hand, unless its a stoney that has encrusted onto the rock.
If epoxied down, you'll usually need to pry under it and use more force.
Again if its a stoney thats encrusted, you'll have to break the base to remove it.

[1bigstud]

Thanks will try next week.

[gregzz4]

Hey Rick,
As Shao wrote, it's easy enough to pry under the glue.
I use a jewellers-sized flat screwdriver, even if encrusted. The frag will pop right off.