Quality Tank Manufactures

[DorySaid]

Originally Posted by Frogger

yes Concept is still highly regarded

I've seen some nice clean tanks from them, but I just had my sump repaired there recently and it was a pretty lousy and lazy job. Silicone not smoothed out; sheets of paper towel siliconed to the bottom etc
Might possibly have to do with who repairs or builds the tank. Wasn't exactly that cheap either

[kyl]

Looks like Concept is scaling down the livestock aspect of their store and re-focusing on the tank building end of things, so that should be good news. I will say that a couple things got overlooked on my sump, though that was partially my fault from forgetting to highlight them after beating my head against the wall trying to deal with Jay. I ultimately went directly through Dave and things got back on track.

Overall they did a great job on my two tanks, especially the one with laminated black glass on the rear panel. Just be sure to stay on top of things, it seems that since Denny has been gone it's quite a challenge to get communication going.

[smokinreefer]

Overall I am happy with my concepts display...

I do concur about keeping on-top of things as they build.

I have yet to get the tank wet, while I am overall pleased with the quality of the tank... It is missing one major thing for me... The tank is to be bare bottom and I had requested to have a white bottom.

Problem is, they forgot about the white bottom.
And me being in Burnaby, and the tank being 8' long, I'm waiting to see what their solution is. I cant think of one. So we shall see.

[DorySaid]

Originally Posted by smokinreefer

Overall I am happy with my concepts display...

I do concur about keeping on-top of things as they build.

I have yet to get the tank wet, while I am overall pleased with the quality of the tank... It is missing one major thing for me... The tank is to be bare bottom and I had requested to have a white bottom.

Problem is, they forgot about the white bottom.
And me being in Burnaby, and the tank being 8' long, I'm waiting to see what their solution is. I cant think of one. So we shall see.

That's dirty.
Well I hope you get a quick and satisfactory solution man. By the way, just curious...why did you wanna white bottom?

[Skimmer Juice]

Originally Posted by DorySaid

That's dirty.
Well I hope you get a quick and satisfactory solution man. By the way, just curious...why did you wanna white bottom?

I just did a tank with white acrylic back panel and white vinyl wrapped bottom , I went white due to detritus is a lot less noticeable . My current tank was done in black and I cant keep it looking good , you see every spec of detritus . Also illuminates better with led lighting imo .

[DorySaid]

Originally Posted by Skimmer Juice

I just did a tank with white acrylic back panel and white vinyl wrapped bottom , I went white due to detritus is a lot less noticeable . My current tank was done in black and I cant keep it looking good , you see every spec of detritus . Also illuminates better with led lighting imo .

I see. I would imagine it would reflect back light like crazy

[Myka]

Originally Posted by kyl

Looks like Concept is scaling down the livestock aspect of their store and re-focusing on the tank building end of things, so that should be good news.

Yes, I'm glad to see this is finally happening, and Dave can focus on the tank building.

Originally Posted by smokinreefer

I have yet to get the tank wet, while I am overall pleased with the quality of the tank... It is missing one major thing for me... The tank is to be bare bottom and I had requested to have a white bottom.

Problem is, they forgot about the white bottom.
And me being in Burnaby, and the tank being 8' long, I'm waiting to see what their solution is. I cant think of one. So we shall see.

Vinyl is easy to install, but difficult if you've never seen it done before. You can get the vinyl from a sign company, or a company that installs vinyl advertising on vehicles. You may be able to hire someone from on of those companies to install the vinyl on your tank bottom. Hopefully you don't have to pay for that yourself.

[smokinreefer]

Originally Posted by Myka

Yes, I'm glad to see this is finally happening, and Dave can focus on the tank building.



Vinyl is easy to install, but difficult if you've never seen it done before. You can get the vinyl from a sign company, or a company that installs vinyl advertising on vehicles. You may be able to hire someone from on of those companies to install the vinyl on your tank bottom. Hopefully you don't have to pay for that yourself.

Yeah never seen it done, can't imagine i'd do a decent job.

But in all honesty I don't think white vinyl on top of the bottom panel is a good idea. I'm thinking, scratches, cleaning, corals growing on it, not a way to ever clean it without wrecking it.

The vinyl would need to go between the glass and bottom plywood, which can't be done now.

So we shall see what we come up with as a solution.

[Skimmer Juice]

Originally Posted by smokinreefer

Yeah never seen it done, can't imagine i'd do a decent job.

But in all honesty I don't think white vinyl on top of the bottom panel is a good idea. I'm thinking, scratches, cleaning, corals growing on it, not a way to ever clean it without wrecking it.

The vinyl would need to go between the glass and bottom plywood, which can't be done now.

So we shall see what we come up with as a solution.

Thats a shame the plywood bottom looks terrible BB . You could silicone acrylic to the bottom similar to how its put on the back of the tank ?

[DKoKoMan]

Looking at Concept right now for my new 225-300g custom tank build. The tanks I have saw on canreef which were built by concept look great! Hopefully all works out and I am able to get them started on the new build.