#1
|
||||
|
||||
Looking for RO auto shut off valve
My 4-way auto shut off valve on the RO unit needs replacing, does any place in Calgary carry this part?
https://media.cdn.bulkreefsupply.com...valve-main.jpg |
#2
|
||||
|
||||
pm'd
|
#3
|
||||
|
||||
Please close as I've located one.
|
#4
|
||||
|
||||
I am looking for one in Calgary also, can you tell me where I can pick up one that wont cost $40? I ordered a few from ebay in October and they still have not showed up 5 months now.
|
#6
|
|||||
|
|||||
I had problems with my Vertex Puratek... after a bunch of troubleshooting it was determined to be my pressure switch.
__________________
300g Basement Reef - April 2018 |
#7
|
||||
|
||||
It is the ASO, i have replaced all the other fittings for this. I opened up teh ASO to clean it out but no luck. It will shut off for about 5 seconds then it will start making a squeak and then the drain will blast for 10 seconds and repeat.
|
#8
|
||||
|
||||
I removed mine, I used electric solenoids to shut water off to my RO, runs via my APEX, plus it auto flushes membranes!
__________________
Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 3x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, Blue LEDs) Vertex Calcium Reactor 2x Deltec Pellet Reactors |