![]() |
|
#1
|
|||||
|
|||||
![]() I had a chance to check the temperature exiting my ATI sunpower fixture. I had it running on 12v which is annoying to say the least when it comes to fan noise. After I ran the infrared temp gauge and the read out was only 28 degrees I was a bit surprised. Now I have it adjusted to 9v and the temp is registered at 32 degrees. I know ATI recommends 36 degrees for optimum running temperature to prolong the life of the ballast and bulbs but I think I am comfortable at 32 degree and half the decibel level on the fan. Winner winner chicken dinner.
__________________
Though a tree grow ever so high, the falling leaves return to the root. 300DD - 140DD ![]() TOTM Fall 2013 |
#2
|
|||||
|
|||||
![]() Bulb change from 4 x coral plus 4 x blue plus to 2 x coral plus 2 x actinic 4 x blue plus. Such a enhancement on coral appearance, at least in my eyes. I don't think it's gonna affect the growth much either. Like it and gonna stick with it.
__________________
Though a tree grow ever so high, the falling leaves return to the root. 300DD - 140DD ![]() TOTM Fall 2013 |
#3
|
|||||
|
|||||
![]() Stunning FTS. Absolutely gorgeous.
Glad to hear you were able to ramp down the fans and decrease the noise. It never occurred to me to check the temperature of the air exiting the fixture. I always ran my active cooling at full blast and the noise from the fans was quite irritating.
__________________
Do or do not....there is no try. |
#4
|
|||||
|
|||||
![]() Quote:
Since I turned down the fans, the fixture is a lot more bearable. Glad I can share that with you.
__________________
Though a tree grow ever so high, the falling leaves return to the root. 300DD - 140DD ![]() TOTM Fall 2013 Last edited by Bblinks; 03-08-2017 at 04:21 AM. Reason: Don't know why there is a thumbs down...must be the darn mods messing with me again. |
#5
|
|||||
|
|||||
![]() I'd give this tank more than 10-15mins of ❤️
Just saying. Jealousy brings out the worst in me LOL
__________________
Illuminata 57gallon rimless <-- this is a lie! |
#6
|
|||||
|
|||||
![]() Nice bro gotta stop by and check out the new light combo soon!
__________________
Always looking for the next best coral... 90g starphire cube/400mhRadium20k/2 XHO/2x27w UV/2x39w T5/ 3 Trulumen led strips |
#7
|
|||||
|
|||||
![]() Quote:
Come come, anytime. unless if you are sick then stay away.
__________________
Though a tree grow ever so high, the falling leaves return to the root. 300DD - 140DD ![]() TOTM Fall 2013 |
#8
|
|||||
|
|||||
![]() Achilles photobomb!!
![]() ![]() ![]() ![]() I need to redo my white balance on the camera again since I replaced the bulbs. This is what I took this weekend.
__________________
Though a tree grow ever so high, the falling leaves return to the root. 300DD - 140DD ![]() TOTM Fall 2013 |
#9
|
|||||
|
|||||
![]()
__________________
Though a tree grow ever so high, the falling leaves return to the root. 300DD - 140DD ![]() TOTM Fall 2013 |
#10
|
||||
|
||||
![]() Since I lost almost all my corals its not a current problem but how do you prevent warfare and the associated RTN? Do you trim constantly?
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |