Levels fluctuating

[Galizio]

Did you try to check if the line is ok... I noticed in my system that the alk was getting lower and lower, try to calibrate the pumps and everything looked ok, till I noticed that one of my line was obstructed and since I put a new one in seems fine


Sent from my iPhone using Tapatalk

[Myka]

Alkalinity doesn't really fluctuate like that without everything else fluctuating (which would point to salinity fluctuating).

What span of time is there between your testing? When you test the alkalinity high, what do you do to fix it?

[iceman86]

I checked the line and everything seems fine.
It can't also be salinity, I got an ATO that kicks in as soon as about a litres of water evaporates.

I wonder if one of my test kits have gone bad and it's giving me bad readings. Can it be caused by calcium or mag actually being too low? My alk kit is faily new and i compared the alk to my old kit and it's only .3dkh difference. The mag is a brand new kit but the calcium is needing replacement soon but still within expiry.

[ReefMadness]

Originally Posted by iceman86

I checked the line and everything seems fine.
It can't also be salinity, I got an ATO that kicks in as soon as about a litres of water evaporates.

I wonder if one of my test kits have gone bad and it's giving me bad readings. Can it be caused by calcium or mag actually being too low? My alk kit is faily new and i compared the alk to my old kit and it's only .3dkh difference. The mag is a brand new kit but the calcium is needing replacement soon but still within expiry.

well i personally won't put that theory to rest.
i tested water regularly but recently switched all my products over to aquaforest product (probiotic salt and their balling method) and wanted to test a little more rigorously so i bought new test kits. against my old salifert test and using the same water sample i'm getting readings of 430 calcium 8.6 kH from my old kits to 500 calcium and 11.8 kH from the new. my corals and livestock look improved at the moment so i'm not going to adjust but it's tough to trust such variance especially when the colors don't appear equal.

[iceman86]

Originally Posted by ReefMadness

well i personally won't put that theory to rest.
i tested water regularly but recently switched all my products over to aquaforest product (probiotic salt and their balling method) and wanted to test a little more rigorously so i bought new test kits. against my old salifert test and using the same water sample i'm getting readings of 430 calcium 8.6 kH from my old kits to 500 calcium and 11.8 kH from the new. my corals and livestock look improved at the moment so i'm not going to adjust but it's tough to trust such variance especially when the colors don't appear equal.

That's quite a difference in test readings!!! Are the new ones also salifert?

[ReefMadness]

yes it was another salifert test and the results are higher across the board with Cal,kH and Mg.

[tang daddy]

Why not try lowering your alk dose....

I test my alk with Hanna vs salifert and the difference can be about .4-7 on the salifert.

But let's say if your alk is at 8 and your dosing 220 ml per day and it's rising why not first try to adjust your doser 6 points belowso 210ml or 214ml per day and see if it stabilizes out. I think salifert is abit higher readings than the Hanna but this could only be for me...

[iceman86]

Originally Posted by Myka

Alkalinity doesn't really fluctuate like that without everything else fluctuating (which would point to salinity fluctuating).

What span of time is there between your testing? When you test the alkalinity high, what do you do to fix it?

I've been testing alk every night at the same time. When it doesn't get consumed, I unplug the alk and calcium hoses from the doser because i dont want it to get out of balance until the next night or the night after until it drops back to 8. The calcium probably does fluctuate, but it would only be 4ppm so it's kind of hard to measure that on a daily basis.

[Myka]

Originally Posted by iceman86

I've been testing alk every night at the same time. When it doesn't get consumed, I unplug the alk and calcium hoses from the doser because i dont want it to get out of balance until the next night or the night after until it drops back to 8. The calcium probably does fluctuate, but it would only be 4ppm so it's kind of hard to measure that on a daily basis.

Ok, then it sounds like you need to adjust your doser a bit lower. Which products are you using for dosing?

[iceman86]

Originally Posted by Myka

Ok, then it sounds like you need to adjust your doser a bit lower. Which products are you using for dosing?

I'm using baking soda for alk, aquaforest calcium and magnesium. I'm also dosing their trace elements but that's shouldn't have any impact on this issue. I could adjust it to be a bit lower, but shouldn't the tank still consume alk daily?

I think this problem started about a month ago when I switched my lighting system from all t5 to half t5 half led.I understand corals take time to adjust but some days consuming elements and others not just seems strange.