![]() |
|
#1
|
|||||
|
|||||
![]() I lost a bunch of sps a while ago. I have no idea why. Only big change is lower ph. So may be pointless but if I can get it back over 8 I think my tank would be happier.
I did some testes of the effluent after my main. Single chamber reactor then after my diy add on chamber and the ph is about 0.25-0.27 higher After reactor ![]() After second add on chamber ![]() I also observed the ph slowly climb as the effluent sat in a cup. Adding an airline to the cup accelerates this. Which makes me think of maybe add a settling chamber with an air stone. Or output effluent in front of skimmer intake. Maybe be stage 3 ![]() Sent from my iPhone using Tapatalk
__________________
ReefDudes Shallow Reef Tank | Fusion 30L Tank Log | DIY FishTankProjects | Arduino Auto Doser | Fluval Edge nano Reef |
#2
|
|||||
|
|||||
![]() Where do you have your pH probe? I have the same reactor myself, I have the effluent into a little cup that overflows into the tank, and the probe sits in there. If I add a second chamber I still want the pH probe on the first chamber effluent so I was thinking of DIY'ing some kind of inline probe holder.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |