![]() |
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Here's some more pics. These are not very representative of he colors of the corals. For some reason, I don't seem to be able to take a good pic of the tank. Anyone have any easy tips for picture taking with a typical point and shoot? I'm using a Canon Power Shot SD1000 Digital Elph. Anyway, these pics show you the right and left sides of the tank, as I said the corals are actually a lot more colorful than this with the naked eye.
|
|
#2
|
||||
|
||||
|
Oh yes, i forgot to mention that it's lit by a 250 watt metal halide (right now has a plusrite 14000K) and supplemented by a DIY dimming LED actinic strip (works great, by the way, and very cost-effective).
|
|
#3
|
|||||
|
|||||
|
Tank looks really nice! Maybe try using a tripod and making sure that the focus confirmation is on (or back off a bit and use the highest quality photo setting, then you can zoom and crop later). As well you could try using the white balance. Find something white (say a piece of PVC or something) and take a photo of it in your tank using the white balance setting, that should help with the colors
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
|
#4
|
|||||
|
|||||
|
The tank looks great.
As Christie said, Don't zoom in just move closer or crop later and check the white balance. I often find just setting the camera to a "SUN" setting for the white balance works for my bulbs (14K Phoenix) -jeff |
|
#5
|
||||
|
||||
|
THat is a nice tank you have there a sump would be a good thing but I know how budgets can get.
Bill |
|
#6
|
||||
|
||||
|
Yeah I'm definitely going to go the sump route. It's just that I'm renting and I have had some issues with tank overflows while using sumps in the past. I figure if I set up float switches in my display tank to turn off the system pump in the event of an overflow failure, that will elimiate that. Don't you think? Also, thanks for the tips on the photography, I'll defnitiely try that stuff. I'm so "camera-illiterate"!
|
|
#7
|
|||||
|
|||||
|
Nice looking set-up
__________________
Mike 150g reef, 55g sump, T5's, Vertech 200A, Profilux III - German made is highly over rated, should just say Gerpan made. Reefkeeper - individual obsessed with placing disturbing amounts of electricity and seawater in close proximity for the purpose of maintaining live coral reef organisms. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|