![]() |
|
|
|
#1
|
|||||
|
|||||
|
Feed less, increase water changes and rowaphos/phosban.
If you're feeding frozen food try thawing it on a paper towel to absorb the liquid (which is full of phosphates) before feeding it.
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
|
#2
|
|||||
|
|||||
|
5 ppm?!
What brand test kit are you using? Have you checked the expiry date? What kind of algae is on your sand?Some of the information in here is geared towards lowering phosphates: http://www.canreef.com/vbulletin/showthread.php?t=44473 |
|
#3
|
||||
|
||||
|
Some good advice in that thread. Using a Nutrafin kit i just got today. Its not expired. Also tested again and same result. I think the algae is slime. I have some growing on the back glass but, i figured only because I dont swipe it with the magnet.
I will do some water changes and run some rowaphos to see what I can do. Martin |
|
#4
|
|||||
|
|||||
|
I didn't have a big phosphate problem but when I added Chemi Pure Elite to my filter it dropped to 0 and has stayed there.
__________________
There are two secrets to success: 1. Don't tell anyone everything. |
|
#5
|
||||
|
||||
|
Phosphate now dropping, thanks guys. Interestingly I tested some freshly mixed salt water (Red Sea) and it was showing 0.5 ppm for phosphate despite the RO/DI water reading zero. Is that normal?
I was going to switch salt anyways. Martin |
|
#6
|
|||||
|
|||||
|
yeah if a salt says "phosphate free" they're lying because all salt mixes have trace amounts of phosphates.
__________________
Everything I put in my tank is fully dependant on me. |
|
#7
|
|||||
|
|||||
|
Also, Nutrifin test kits are nutoriously innacurate. Use a good brand like Elios, Salifert, or Aquarium Pharmaseuticals
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|