Ghl Profilux Discussion And Support Thread

[Tom R]

Hi Colin

There are a couple of threads on RC that deal with the problem of ALARMS.

http://reefcentral.com/forums/showth...readid=1394820

http://reefcentral.com/forums/showth...readid=1379604

I do not know if either of these will help. There may be more threads discussing ALARMS out there.

The second thread may be more closely related to your problem.

Tom R

[niloc16]

thanks for that tom. i actually found that it the box for one of the tunzes that is going off intermittently. dont know what from i have to research that unless someone here knows

[Aqua-Digital]

what voltage do you have them set at in the 1-10V interface?

[niloc16]

i figured it out, the connector on the control box for the tunze was a little loose.

[zoomin]

OK, I am ashamed to admit that I cannot figure out how the level sensor kit is supposed to be installed - any pics or documentation out there?

[zoomin]

a little more searching was all I needed:

http://reefcentral.com/forums/showth...5#post12146235

[Aqua-Digital]

Beat me to it.

Let me know if I can help further

[Patrick1]

Originally Posted by zoomin

OK, I am ashamed to admit that I cannot figure out how the level sensor kit is supposed to be installed - any pics or documentation out there?

Thats ok I spent a day working on my auto top off only to find out I had plugged the pump into the wrong socket. YES SMRT I mean SMART...

[niloc16]

it has been 3 times now that the last digital powerbar in the daisy chain has lost connection with the controller. the connection link led is still lit but the controller does not control anything and i have to reprogram the bar. any ideas what the heck it is?