It is hard to answer this without knowing what you have purchased and what the spec is. My knowledge of the dimming side of profiLux is still growing but the following is correct.
The dimming modules LF-ABOX and LBF-AP act as an interface between the light unit dimmable ballasts and the profilux, not only that using the LF-ABOX as the interface this acts as a complete shut off to the lights when the 1-10V line drops to a certain level.
So my answer would be without seeing any specs is that no you will need one of these interfaces. for the sake of a few $$$ i would seriously concider getting the correct spec ballasts from GHL and the interface, I think it will save you more in the long run.
GHL do manufacture high end T5 light bars that already dimmable also, you will have to talk to proline for prices though.
Hope I have got your question correct? if you can supply a bit more info i can help further
Regards
Michael
Last edited by monitors-direct; 04-30-2007 at 08:39 PM.
|
04-30-2007, 08:35 PM
Threaded Mode
