Sulfur denitrator experiment

[Skimmerking]

Tony sounds good. I hope that i can get one if I can figure out this kalk reactor that i have I may have to fix it into a sulphur reactor too. here is a picture of the kalk reactor.. the one on the right what ya think TOny is it workable.

[Delphinus]

Potentially .. you might end up needing to modify it quite a bit though. The kalk reactor mix path is from the bottom to about partway up, whereas you'd want to fill as much of the chamber as possible with the media, so the mix path needs to go from the bottom to right to the top. The pump may also need to be upped from a maxijet to something stronger.

I'm by no means an expert on the subject though, I'm just trying this out for the first time just to try to figure it all out too!

[Delphinus]

Day 6 Readings:

Tank pH - 8.2
Tank NO3 - 75ppm (Salifert)

Stage 1 effluent pH - 7.3
Stage 2 effluent pH - 7.6

Stage 2 effluent NO3 - 50ppm (Salifert)

Just to eliminate "testing error" (since I only did one sample for each reading above) I'll test NO3 again tomorrow using a different test kit. The original readings I took, were done with an Elos NO3 test kit, so that's what I'll use again tomorrow to see if I can confirm the apparent reduction already at this point.

Anyhow this is interesting stuff. Just under a week and the effluent coming out of the reactor appears to have a lower nitrate value than the inflow. The second stage, for buffering the low pH output of stage 1, does appear to have some function although not as profound as one might like (0.3 difference? better than nothing I suppose). Really is there a difference between dumping 7.3 into your tank versus 7.6? The drip rate is about 1 drop per 1-to-2 seconds so it is a very slow throughput.

[Psyire]

Nice results so far!

I would think the 2nd stg will work better once the bacteria is established in the sulphur stage... The difference in pH should grow as more and more CO2 is produced by the denitrifying bacteria.

[Delphinus]

Day 10 Readings (Thursday, forgot to post right away)

Tank pH - 8.2
Stage 2 effluent pH - 7.5 (didn't measure stage 1 effluent)
Tank NO3 - 75ppm? 60ppm? Had a REALLY hard time guessing how pink the reading was.
Stage 2 effluent NO3 - Hopelessly unreadable. Seemed like less but cannot be sure.

I hate test kits. Going to try again in a few days.

And I broke my vial for the Elos test kit so these were done with Salifert. Did I mention I hate test kits???

[Delphinus]

Unfortunately it's too late and too expensive to ask Santa for one of these, but how cool is THIS thing?
http://www.jlaquatics.com/phpstore/s...uct_ID=pp-mno3

Um .. eh heheh, anyone got one they'd care to lend me for a couple days???

Guess I know what I'm saving up for now .. next toy

[littlesilvermax]

Interesting. Our LFS, SWC, has had good success with denitrators.

FWIW I have a BB tank and a good skimmer and 23 fish including 5 tangs, and I feed two tablespoons worth a day and can never even get detectible nitrate readings in it.

I do get about 10 ppm in my coral QT though.