Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Tank Journal

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 03-31-2013, 04:49 PM
Scythanith's Avatar
Scythanith Scythanith is offline
Member
 
Join Date: May 2008
Location: Saskatchewan
Posts: 1,088
Scythanith is on a distinguished road
Default Scott's 270g aka Project Mayhem

Hello All,

We bought a new home 5 years ago and the plan was always to develop the basement into a comfortable living space that accommodates our love for animals. My wife Wendy has ~10-15 snakes at any given time depending on if any one is breeding, a tarantula, Aussie Frilled Dragon, Plated Lizard. I just took down my 85 gal and moved the inhabitants to a 40 gal on rollers to make the development a little easier. I have had a 10 gal nano, 20 gal mantis tank, 85 gal mixed reef. We also have a red eared slider and an awesome pound dog named Jasper.

6 snake tanks are incorporated into one of the walls and mounted on 200lb sliders to make pulling them out of the shelf unit for maintenance easier. They will have pocket doors over the fronts of the tanks that are finished in an Espresso coloured wood veneer. Just think Petland or something like that.

On to the good stuff! Before I get too far into I want to that Steve (sphelps), Colby with Bayside Corals and Denny at Concept Aquariums, I could not have done this without them. I asked Wendy what we should called the build thread and she said Project Mayhem, so I present to you Project Mayhem!



It is a 270 gal (72"w x 36"d x 24"t) with an external overflow on the left hand side. It's all 1/2" glass with the front and right side viewing panels being made out of starfire glass. It has a 1/2" plywood base glued to the bottom pane. The euro bracing is drilled for the returns.

The sumps are in a stacked configuration. The water from the overflow is fed into the sumps with 2 x 2" returns. The first chamber is a frag tank, the second is the return pumps. There is an overflow to the lower sump which will feed the skimmer, reactors, filter bags, and refugium. It's also has a water change chamber and an emergency overflow. I know this goes against the conventional thinking that the dirtiest water should hit the skimmer first, but I am going to utilize the energy from the overflow feeding into the sump for frags. The skimmed/reactor/refugium water will be fed back into the pump chamber and returned to the display tank.

I traditionally have used overdriven T5's for my reef tanks but and switching over to LED's. I have purchased 3 Mitras fixtures so hopefully that should cover the coral's lighting needs. The returns and reactor pump with likely be DC Wavelines. In-tank circulation will be handled by four Vortech MP40w's. One underneath the overflow and three along the back wall. I will put one on the right viewing pane if need be but I want to keep the pane clean. I will likely wrap the pack pane in black vinyl.

I am not sure about my skimmer yet. I have a BK Mini 180 and I like the quality, but I also use a Euro-Reef RC-1000 and it's been great aside from cooking a pump once. I am thinking a BK supermarin 200, but hate to overpay if there is something equivalent in quality/performance for less.

OK, so that should sum up what I am thinking of. Now for the good stuff!

Design phase:





Building the stand, preparing the fish room and getting the basement ready:








Last edited by Scythanith; 03-31-2013 at 04:51 PM.
Reply With Quote
 

Tags
abyzz, bubble king dc 250, mitras, profilux 3, reef


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 10:22 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.