![]() |
#16
|
|||||
|
|||||
![]() I got a few of these locally from a garden center, but still not at that good of a price. Anyhow, if you can get the bung plugs with the lid or barrel, check them out. In many cases you can drill out the bung plug and some of them are threaded so if drilled carefully, you'll have a nice threaded hole to put a valve into. Then, provided the bung plug also has the seal with it, you can lay the barrel on its side. This way you don't need to drill extra holes & add bulkheads, seals etc. You do lose some capacity with it on it's side and of course get or DIY some sort of stand for it, but that's the way I use one of them to collect RODI waste water.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() |