RO DI System set up parts in Calgary...Help

[sphelps]

I've done this twice before, I got everything I needed from Home Depot.

I used a Y splitter with built in valves on the faucet/valve which I got from the garden hose section. The laundry hose attached to the one side as before.

On the other side I used a 3/4" x 1/2" pvc threaded bushing from the PVC plumbing department.

Then I used a plastic 1/2" thread to 1/4" loc (for RO line) fitting which was in another isle next to the PVC plumbing with all the small brass fittings and such.

Don't forget the Teflon.

Worked great.