110g Mixed Reef V2

[fishytime]

I got the sump finished tonight. Well... I finished it yesterday , but I leak tested the baffles tonight and....IT HOLDS WATER . Cutting the glass for the baffles actually proved to be way harder than drilling the tank. I just could'nt get the glass to break cleanly on my scribe. So I broke out the trusty beltsander to grind down the wonky cuts.The following pics show the sump and a couple of the goodies to go in it. The layout is; skimmer/drain section on the left, return pump section in the middle, and drain/refugium section on the right.If you guys see any issues with this design PLEASE let me know. This is my first sump and I wanna get it right. The return pump is a quiet one 6000, and the skimmer is a euro-reef rs135.I need to do the overflow box inside the tank, but I think I will leave the cutting of that glass to the experts. 3/16" glass was hard enough, never mind the 3/8" glass I will need for the overflow. Then after that is the plumbing. I am a carpenter by trade so wood is really my thing. But I am learning lots and I think I have a handle on how the plumbing needs to be.