|
|
|
#9
01-09-2008, 03:25 AM
|
|||||
|
|||||
reply
My new thoughts about this were to drill all of the holes through the bottom, which is 1/2" glass. So I'm thinking of the four holes for the closed loop and drain, plus another smaller hole for the return. How far apart do these holes have to be? If they have to be any significant distance I could be looking at a coast to coast overflow.
I don't really want a coast to coast overflow because with a 4" eurobrace I would have to have it extend 7" out from the back of the tank in order to be able to still reach into the overflow. I'm still debating just taking the tank back to have them replace the back panel with 1/2" glass so that i can drill it.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 
|
Threaded Mode
