|
|
|
#10
12-02-2006, 03:20 AM
|
|||||
|
|||||
Potentially .. you might end up needing to modify it quite a bit though. The kalk reactor mix path is from the bottom to about partway up, whereas you'd want to fill as much of the chamber as possible with the media, so the mix path needs to go from the bottom to right to the top. The pump may also need to be upped from a maxijet to something stronger.
I'm by no means an expert on the subject though, I'm just trying this out for the first time just to try to figure it all out too!
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! 
|
Threaded Mode
