PDA

View Full Version : Profilux and AI Programming


RezReef
05-13-2012, 09:32 PM
Looking for help getting started...the only thing that seems to be working is the manual control...

apexifd
05-13-2012, 11:01 PM
You will need to program the channels.. you need to at least program channel one, and use the same setting on channel 2 and

Sol blue uses 3 channels. Not sure about sol white, most likely just 2 channel.

RezReef
05-13-2012, 11:23 PM
so far i can only get one blue going...and only @ 100%...no option to adjust % ...

Bblinks
05-13-2012, 11:25 PM
Go into lighting set up in profilux, select special lamp and set up accordingly then you can use light settin 1,2,3 to set up the three different channels of AIs.

RezReef
05-13-2012, 11:37 PM
I selected the Aqua Illuminations assigned channels 1, 2 & 3...now where do I go from here...

Jason McK
05-13-2012, 11:43 PM
That's it. Just plug your power into a always on socket or a wall plug.
I know it's so easy compared to everything else.

J

RezReef
05-13-2012, 11:56 PM
ok so where do i go and adjust the lights to my liking and % ...seems like nothing is working...the only thing that i can get going is in the light senerios and manual thunderstorm...

RezReef
05-14-2012, 12:04 AM
what does the Light Composer do...Illumination 1 to 8...Simulation...Thunderstorm...Light Senerio and Illumination Overview all do...

apexifd
05-14-2012, 12:06 AM
Now, programs the channel 1-3.. Set the time and intensity for all 3 channels.

RezReef
05-14-2012, 12:10 AM
where do u do this...