Profilux and AI Programming

[RezReef]

Looking for help getting started...the only thing that seems to be working is the manual control...

[apexifd]

You will need to program the channels.. you need to at least program channel one, and use the same setting on channel 2 and

Sol blue uses 3 channels. Not sure about sol white, most likely just 2 channel.

[RezReef]

so far i can only get one blue going...and only @ 100%...no option to adjust % ...

[Bblinks]

Go into lighting set up in profilux, select special lamp and set up accordingly then you can use light settin 1,2,3 to set up the three different channels of AIs.

[RezReef]

I selected the Aqua Illuminations assigned channels 1, 2 & 3...now where do I go from here...

[Jason McK]

That's it. Just plug your power into a always on socket or a wall plug.
I know it's so easy compared to everything else.

J

[RezReef]

ok so where do i go and adjust the lights to my liking and % ...seems like nothing is working...the only thing that i can get going is in the light senerios and manual thunderstorm...

[RezReef]

what does the Light Composer do...Illumination 1 to 8...Simulation...Thunderstorm...Light Senerio and Illumination Overview all do...

[apexifd]

Now, programs the channel 1-3.. Set the time and intensity for all 3 channels.

[RezReef]

where do u do this...