#1
|
|||||
|
|||||
Question about replacing RO membrane
(.. I haven't actually replaced a RO membrane yet )
So if I have my replacement membrane ... do I want to get it wet before putting it in? Or just put in and go? Do I want to discard the first little bit of water that comes out of it? Or is it good to go, right from the beginning?
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#2
|
|||||
|
|||||
Just put the membrane in and you're good to go. Definatly discard the first little bit of water. Some brands have a certain ammount you need to flush before use in aquariums or as drinking water but go with 2 hours as reccomended by Aqua-Safe RO units.
|
#3
|
|||||
|
|||||
Flush it.
__________________
Marty 50g reef, bubble king skimmer,20g sump,zeovit system, PM cal reactor |
#4
|
|||||
|
|||||
thanks guys
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |