Vertex Illumina LED Arrives

[purelife]

When in expert mode do should you just be able to click and add new points?
Weird i'm having a hard time doing that. I loaded your config but i dont have any points for white or the blues

[TheDogFather]

Originally Posted by purelife

When in expert mode do should you just be able to click and add new points?
Weird i'm having a hard time doing that. I loaded your config but i dont have any points for white or the blues

Can you post a screen shot?

[purelife]

I think its got your moon cycle in there..
Whats the difference from day& moon and startup-settings

Attachment 7075

[purelife]

Think i got it figured out now!
my biggest issue was i had the time set to 8 Am.. I was trying to figure out why the hell the unit was doing a sunrise at 7pm at night..

[purelife]

Can anyone help me with setting a lunar cycle.
I got it all setup but when i go to set the number of days till full moon it does something weird and disconnects from the unit when i put the number of days in and click ok.

So i found an error in the actual light!
They put the wrong color leds in my 2 pads close to the side where the power cord comes out.

I was showing the gf all the cool things the light can do when she asked me why 2 pads had different leds, at first we thought it was our eyes playing tricks on us but it is actually is wrong.
Where it should be blue i have royal blue leds in its place, so essentially that pad has all Royal blue.

[TheDogFather]

Originally Posted by purelife

Can anyone help me with setting a lunar cycle.
I got it all setup but when i go to set the number of days till full moon it does something weird and disconnects from the unit when i put the number of days in and click ok.

So i found an error in the actual light!
They put the wrong color leds in my 2 pads close to the side where the power cord comes out.

I was showing the gf all the cool things the light can do when she asked me why 2 pads had different leds, at first we thought it was our eyes playing tricks on us but it is actually is wrong.
Where it should be blue i have royal blue leds in its place, so essentially that pad has all Royal blue.

There is nothing strange going on, when you enter a value for the number of days until the next full moon and click Ok it sends the new value to the fixture immediately and the fixture then restarts using the new value.

About the color problem, did you isolate the pod by selecting it in the Special Setting option using the enable buttons and then adjusting the colors using the compose color feature in the Day menu under actions? This will allow you to tun off all the other pods and just tweak the colors of the pod in question to confirm your suspicion that one of your pods only has RB LED's and not both RB and B...

Cheers!

-TDF

[Twinn]

Anyone remember the days when lights just had an on and off switch.

[purelife]

Originally Posted by TheDogFather

About the color problem, did you isolate the pod by selecting it in the Special Setting option using the enable buttons and then adjusting the colors using the compose color feature in the Day menu under actions? This will allow you to tun off all the other pods and just tweak the colors of the pod in question to confirm your suspicion that one of your pods only has RB LED's and not both RB and B...

Cheers!

-TDF

Yup i did that i also could just see it when i only select blue across all pods you can clearly see the difference between the remaining pods then turn on royal blue you can see that the leds in question match that color., I sent an email to Vertex and they asked for pictures which i responded with just waiting for them to reply back with what they think. Oh well i still love the unit just a small hiccup