Skimmer for a 400gal system

[DSlater]

Ran our 300G system with a beckett style skimmer for over a year and could never get it dialed in for any length of time, constantly needed attention. Picked up a used Deltec 902. Once set up I haven't had to fiddle with anything, just empty once a week.
There are a few larger tangs in the tank so I could never get the nitrates down below 25ppm with the beckett, after one month of running the Deltec we are down to 10ppm.
Probably would have these results from a number of other good skimmers as well.

[vanreefer]

Originally Posted by DSlater

Ran our 300G system with a beckett style skimmer for over a year and could never get it dialed in for any length of time, constantly needed attention. Picked up a used Deltec 902. Once set up I haven't had to fiddle with anything, just empty once a week.
There are a few larger tangs in the tank so I could never get the nitrates down below 25ppm with the beckett, after one month of running the Deltec we are down to 10ppm.
Probably would have these results from a number of other good skimmers as well.

Glad the beast has found a good home and is working out for u
Cheers
VR

[The Grizz]

I have had my 450 gal system running on a Reef Octopus PRO SSS-DC3 Skimmer with Controllable DC Pump for a while now and really like it.

[Skimmin]

Thanks for the replys. I haven't quite been able talk myself into spending $1900 for the TC2560 (recirculating Deltec). I've decided I'm going to try the ATI Powercone 250IS. It's rated for 250-500 gallons. If it doesn't do the trick, I'll drop the buck on the Deltec, but figure I'd like to try this skimmer. It seems to have some 'in theory' good features like a meshwheel, digital air meter, and controllable pump. This ones gonna cost $820 so if it does what I need then I can save myself over $1200 on the skimmer and of course... spend it on something else for the tank.lol