|
#1
|
||||
|
||||
Does your Puratek have abooster pump? What pressures do you get? I am on Edmonton water supply with a booster pump and get 100psi on the gauge. Not sure if a pressure tank would be worth it.
|
#2
|
|||||
|
|||||
Mine also only stays about an 1" of water. I have no booster pump and I get 100psi.
|
#3
|
|||||
|
|||||
Yeah it has booster. But pt might be good as larger reservoir
|
#4
|
|||||
|
|||||
Pressure tanks work just fine, i have a few running off my 200GPD puratek, along with float switch in sump for ATO, and 2 50Gallon barrels for H2O Changes. I use the pressure tanks for fresh drinking water, under the sink in the kitchen, and under the sink at the wet bar, and one for the fridge, to make Ice
|
#5
|
|||||
|
|||||
I'm getting about 125 psi
|
#6
|
|||||
|
|||||
What do you have your pressure tank bladder pressureet to 20 psi or 30 psi
|