Port forwarding and DNS server: From Shaw to Telus

[makana]

Browse to 192.168.1.254 and log in. If it is still default it will be on a sticker on the router. Go to firewall page and port forwarding. Enter your LAN IP, the external port, and the internal port. Internal port is whatever the RKE uses. External is a port you choose, just don't choose a common port like 80 as most common ports will be blocked.

The DNS addresses can be seen on the first page when you log in.

[reefme]

Originally Posted by makana

Browse to 192.168.1.254 and log in. If it is still default it will be on a sticker on the router. Go to firewall page and port forwarding. Enter your LAN IP, the external port, and the internal port. Internal port is whatever the RKE uses. External is a port you choose, just don't choose a common port like 80 as most common ports will be blocked.

The DNS addresses can be seen on the first page when you log in.

There are two DNS addresses which one do I use and where should should I put it?

[makana]

If you are adding DNS servers to the network setup then you add your router as primary (192.168.1.254) and one of the servers from the main Page as secondary, doesn't really matter which so use the first.