Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > Buy/Sell/Trade > Buy/Sell/Trade (Aquatics hardware related only)

Reply
 
Thread Tools Display Modes
  #1  
Old 10-24-2020, 02:53 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default FS: Tanks, Stands, Sumps, Lights, Pumps, Powerheads, Heaters, Thermometers - Burnaby

PM your # for fastest response

Tanks stands and sumps

Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow.
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
$500.00

60g sump black trim. I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.
$250.00

Aqueon 75g Reef Ready black trim. Eggcrate tops and acrylic overflow box cover with float switch and wiring, plus 1/2” pink styro.
These tanks come standard with a 1” and a 3/4” through-the-bottom bulkhead. I used threaded for ease of reconfiguring plumbing.
Simple drain plumbing and over-the-top returns included.
Wood stand; 2x4 base and legs, 2x6 rails no center supports with plywood shelf and ends. 48-1/2” x 18-1/2” x 31-3/4” tall.
Opening between legs is 37-1/2” wide and 22-1/4” tall from shelf to upper rails. Front to back between legs is 12-1/2” and end to end between plywood is 47-1/4”.
20g long sump approx. 30” x 12-1/2” x 12-1/2” tall. Left and right chambers are both 13-1/2” wide. First baffle is 9-1/2” tall, return baffle is 9” tall. Center baffle is 10-1/4” tall.
NO return pump. See other listings for electrical hardware.
Vertical corners were re-sealed. Good enough setup for observation/hospital/quarantine.
$150.00


36g Aqueon Bowfront black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
$125.00 Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00


Aqueon 20g black trim on Aqueon mdf black stand. Tank has acrylic and eggcrate cover. Custom cut for probes, AC50, heater.
Single door, one shelf. 27” x 14-3/4” x 46-1/2” tall overall.
Some water damage on lower left of stand from wet carpet. Bought new; never any Copper.
$75.00

Aqueon 20g black trim on bowfront mdf stand. Open concept (no door or shelf). 42’ overall height.
Bought from original owner; never any meds.
$60.00

Custom 28g eurobraced mixing tank. Glass construction. 25” x 13” x 21-1/2” tall. 1 gallon scale markings. 3/4” threaded bulkhead left bottom with some plumbing and valve.
Includes MJ600 and MJ900.
$40.00 Can include stand below for another $20.00
Can include 100w Jager heater and Vertex gnd probe for another $35.00

Stand black pine 25-1/4” x 13” x 25-3/4” tall with lower shelf. Holds 10g on bottom shelf (my ATO tank) and top fits above mixing tank.
$25.00

Aqueon 10g tanks black trim. Never any meds.
$15.00 with acrylic lid (1 available)
$10.00 tank only (1 available)

Lights

ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans. Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Converted from stock twin power cables to 4 x power cables. I can easily convert it back if you like.
2 x Blue Plus new start of October; good for 15-18 months @ 10hr/day. 2 x Blue Plus good for another year @ 3hrs/day.
2 x Coral Plus and 2 x Aquablue Special good for another 6 months @ 6hrs/day.
Spare bulbs;
4 x Coral Plus used 7hrs/day for 12 months. Good for at least another 6 months @ 10hrs/day, or a year @ 4-5hrs/day.
2 x Aquablue Special used 5hrs/day for 12 months. Good for at least another year @ 10hrs/day.
2 x Blue Plus used 3 hrs/day for 6 months. Good for over another year @ 10hrs/day.
—- Bulk Reef Supplies ran T5HO testing and proved we can run these bulbs for up to 15-18 months of regular use before PAR sees any significant reduction.
$500.00 FIRM Will include my Canopy (listed below) for another $50.00

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide.
$100.00

Coralife Aqualight Dual T5HO with legs #08600 24” fixture. 2 x 24watt; 1 ATI Coral Plus and 1 ATI Aquablue Special. Bulbs run for less than 1 month. Comes with used ATI Blue Plus and ATI Coral Plus; no idea how old they are.
$90.00

Coralife Lunar Aqualight 30” 2 x 65watt Power Compact 6700k bulbs, 2 x moonlights and cooling fan; with mounting legs.
Works fine. Good for T5 conversion project or parts.
$50.00

Coralife Aqualight 24” 1 x 65watt Power Compact 10k bulb. With mounting legs and spare used 6700k bulb.
Works fine. Good for T5 conversion project.
$25.00

Coralife LED Aqualight 30” fixture #08626 Tri-light LEDs. Comes with all 11 sockets filled with light pods; 4 x 10k, 2 x Actinic, 3 x 60/40 and 2 x Colormax. Total of 33 LEDs. Mounting legs, cooling fan and moonlights. 3 cords.
Used less than 3 months. Stupid money new; currently on fleabay for $320US without the extra 4 pods @ $40+US each.
Do your research whether this will be enough for your needs. Claims to be good enough for SPS … I’d say LPS.
$100.00

20” Canopy for 10g; twin 25watt incandescent sockets and 1 bulb. Previous owner burnt inside housing.
Probably takes LED bright sticks.
Free

24” Canopy for 20g tall; AllGlass brand 19watt fluorescent used freshwater only; condition excellent
$15.00

24” Canopy for 20g tall; 15watt some saltwater use; condition good needs a wipe
$10.00

24” Canopy for 20g tall; unknown plant bulb, some salt rust, DIY legs for use without canopy
Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition
Free

Water pumps

-Eheim
Compact 600 max head 1.3m; 150-600lph; 11watts; adjustable flow screen inlet; 1/2” push-on outlet
Comes with push fitting adapter for 3/8” tubing for reactors or what have you
$25.00 each 2 available

Compact 1000 max head 2.0m; 150-1000lph; 23watts; adjustable screen inlet; 5/8” push-on outlet
$30.00 used
$45.00 NIB

Compact+ 2000 max head 2.3m; 1000-2000lph; 35watts; screen or 3/4” FPT(?) inlet; 3/4” barbed outlet
$75.00 w/silicon tubing currently running on 1/10hp chiller

Compact+ 3000 max head 3.0m; 1500-3000lph; 66watts; screen inlet or 3/4” FPT; 3/4” FPT outlet. Adjustable output; run submerged or inline
$125.00 NIB

Compact+ 3000 transfer pump setup; same above specs
Comes with 65 feet of 1/2” clear vinyl tubing; ball valve near each end; and an assortment of unions/other fittings; wall hanger. Was used to pump RO to my sump room then old SW to the toilet then flushed with RO after each use.
$175.00
Can come with 55g RO drum w/lid for another $75.00 which includes 3/4” Uniseal and 3/4” Cepex ball valve at drain/supply height; high overflow uniseal w/pipe plumbing; 1/4” RO shutoff valve

Universal 1262 max head 3.6m; 3400lph; 80watts; 3/4” FPT inlet and outlet
$100.00 each 2 available

Universal 1262 impeller cover NIB
$10.00

Universal 1260/1262 O-rings 2 pack NIB
$10.00

-Quiet One Pro
1200 max head 6.1ft; 296gph; 25watt; screen or 1/2” MPT inlet; 1/2” MPT outlet
$30.00

4000HH ‘high head’ max head 13 feet; 980gph; 120watts; 1” inlet 3/4” outlet. w/some 1” outlet hose and spare NIB impeller cover
$75.00

Powerheads

-Cobalt 600 NIB; tested with push fittings; all original parts still bagged in the boxes
$35.00 2 available

-MaxiJet
MJ400 $10.00 each 2 available
MJ600 $15.00 each 3 available
MJ900 $15.00
MJ1200 $15.00

Heaters

-AllGlass 100w never submerged $15.00
-Aqueon 10watt AQ10w very little use in acclimation buckets $15.00
-Eheim Jager
100watt NIB $35.00
100watt never submerged $25.00
100watt used in mixing tank $20.00
200watt NIB $40.00
200watt never submerged $30.00 each 3 available
250watt never submerged $30.00 each 2 available

Thermometers

Floating glass 5 available free with purchase over $10.00
Lifegard Big Alert first style no clock $25.00 2 available

Last edited by gregzz4; 10-24-2020 at 02:59 AM.
Reply With Quote
  #2  
Old 10-27-2020, 03:00 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

Blurry DT shot - just some leftover sand I haven't cleaned out yet


Reply With Quote
  #3  
Old 12-18-2020, 02:12 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info

Please PM your # for more info

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump $250.00
I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.

36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand $60.00
Include Jager 100w and titanium gnd probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g $10.00 - needs top trim resealed - is loose right now

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Eheim Compact+ 600 $25.00ea - 2 available

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked housing but no leaks

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

Cobalt 600 NIB $30.00

MJ400 w/circulation kit $15.00

MJ600 $15.00

MJ600 w/circulation pump kit $20.00

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line $20.00
100watt used in mixing tank $15.00
200watt NIB SOLD
200watt never submerged above water line $25.00 each 3 available

Lifegard Big Alert first style no clock SOLD both

Floating thermometer free w/$10.00 purchase 2 available
Reply With Quote
  #4  
Old 12-18-2020, 02:28 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default









Reply With Quote
  #5  
Old 12-29-2020, 09:44 PM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info

Please PM your # for more info

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump $250.00
I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.

36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand $60.00
Include Jager 100w and titanium gnd probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g $10.00 - needs top trim resealed - is loose right now

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Eheim Compact+ 600 $25.00ea - 2 available

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked housing but no leaks

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

Cobalt 600 NIB $30.00

MJ400 w/circulation kit $15.00

MJ600 $15.00

MJ600 w/circulation pump kit $20.00

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line $20.00
100watt used in mixing tank $15.00
200watt never submerged above water line $25.00 each 3 available

Floating thermometer free w/$10.00 purchase 2 available
Reply With Quote
  #6  
Old 12-30-2020, 10:50 PM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your #

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump $250.00
I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.

36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand $60.00
Include Jager 100w and titanium gnd probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g $10.00 - needs top trim resealed - is loose right now

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Eheim Compact+ 600 $25.00ea - 2 available

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

Cobalt 600 NIB SOLD

MJ400 w/circulation kit SOLD

MJ600 $15.00

MJ600 w/circulation pump kit $20.00

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line $20.00
100watt used in mixing tank $15.00
200watt never submerged above water line $25.00 each 3 available

Floating thermometer free w/$10.00 purchase 2 available
Reply With Quote
  #7  
Old 01-03-2021, 02:07 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your #

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump $250.00
I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.

36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand, MJ600 and MJ900 $60.00
Include Jager 100w and titanium ground probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 2 available

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

MJ600 $15.00

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line $20.00
100watt used in mixing tank $15.00
200watt never submerged above water line $25.00 each 3 available

Floating thermometer free w/$10.00 purchase 2 available
Reply With Quote
  #8  
Old 01-06-2021, 11:23 PM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your #

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump $250.00
I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.

36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand, MJ600 and MJ900 $60.00
Include Jager 100w and titanium ground probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

MJ600 $15.00

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line $20.00
100watt used in mixing tank $15.00
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available
Reply With Quote
  #9  
Old 01-23-2021, 12:39 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your #

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump $250.00
I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.

36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand, MJ600 and MJ900 $60.00
Include Jager 100w and titanium ground probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

MJ600 $15.00

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line $20.00
100watt used in mixing tank $15.00
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available
Reply With Quote
  #10  
Old 02-11-2021, 12:02 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your #

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump $250.00
I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.

36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand, MJ600 and MJ900 $60.00
Include Jager 100w and titanium ground probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

MJ600 $15.00

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line $20.00
100watt used in mixing tank $15.00
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 03:09 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.