|
#1
|
|||||
|
|||||
Hey mrhasan, as per your pic all sensors are above water. Can the tempo sensor be fully submerged?
Sent from my SGH-I747M using Tapatalk |
#2
|
|||||
|
|||||
Temp sensor is not fully submersible. You will need to keep the top above water.
__________________
You wouldn't want to see my tank. I don't use fancy equipment and I am a noob |
#3
|
||||
|
||||
I did not know this... I have nearly the identical set-up as you. I have had mine submerged for 2 months nearly and it still works fine? Any chance that they have just told you its not submersible for liability reasons?
|
#4
|
|||||
|
|||||
Quote:
This is kind of like ranco probe, some used it submerged for years but the manufacturer suggests not to do that.
__________________
You wouldn't want to see my tank. I don't use fancy equipment and I am a noob |
#5
|
||||
|
||||
Quote:
I like your review, but the Temperature probe is completely submersible. I have two that have been under 2 ft of water for 11 Years. If you look at the top of the probe you will see two yellow Gaskets that are compression sealed tightly around the probes cord. Robbyg |
#6
|
|||||
|
|||||
Quote:
Thanks for your comment I had my doubts because of those two gaskets while the FAQ section saying none of the probes are submersible so assumed those gaskets can protect the sensor from temporary submersion only. I guess it is just a liability issue that Aquatronica would like to stay clear off. Thanks for confirming that And welcome to Canreef!
__________________
You wouldn't want to see my tank. I don't use fancy equipment and I am a noob |
#7
|
||||
|
||||
Quote:
I also am in the process of doing a review on Reefcentral and I will try to carry over some of my observations to this forum. all the best Robbyg |
#8
|
|||||
|
|||||
Quote:
I was able to dig the following bugs: 1. Fahrenheit doesn't work for hysteresis. 2. Email test function doesn't work. 3. The controller doesn't show/store data for SG unit while other units for density works fine.
__________________
You wouldn't want to see my tank. I don't use fancy equipment and I am a noob |
#9
|
||||
|
||||
Quote:
As for the email I actually had no problem with the Test function, but I know others have, it seems to depend on which ISP you use. I am pretty sure it's a simple fix since the email itself works properly. They had these same kind of bugs when the ACQ110 first came out. Aquatronica always focuses on the Core functions first and foremost. They absolutely do not want your controller to crash or lockup or turn on something when it should not be turned on. Once they have that in place they fix these kinds of problems. We are at the point where they are fixing these remaining small issues. Next comes the fun part when they ask for requests for new features. They pretty much gave us everything we requested for the ACQ110 and ACQ115. The new version of firmware for the Touch is supposedly coming out at the end of this month and should fix those problems. I did point them out to Massimo a couple of months ago and he said they were being fixed. The SG unit problem you are having is strange because I am not having that issue at all. As you might have seen in my review on Reefcentral the SG is right there on screen #1 It also stores the Data and Graphs it. The only problem is that the Graph auto scaling is not working properly, so you cannot see small changes for example from 1.024 to 1.025 on the graph. That is something that they say will be fixed. The FAT lines on the graphs are also a major issue that I was assured would be fixed. Also Graphing Data is stored on internal memory, I asked them about having it moved to external memory so that we could just stick a USB key or SD card into the PC to archive it. |