Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Product Review and Equipment Forum

Reply
 
Thread Tools Display Modes
  #1  
Old 02-14-2019, 04:34 AM
DKoKoMan's Avatar
DKoKoMan DKoKoMan is offline
Member
 
Join Date: Dec 2016
Location: Edmonton
Posts: 1,250
DKoKoMan is on a distinguished road
Question What Heaters are You Running?

I am just wondering what people are using for heaters these days with all the new technology out there. It seems the heaters are one of the pieces of equipment which we all depend on but really seem to have fallen behind.

I am currently running titanium heaters for a year and recently had one fail. Luckily it didn’t stick on, rather the controller displayed heating but the titanium rod itself was cold to touch. I have also used eheim Jager heaters, other then the length they seemed to be fine. I’m just looking for feedback on if it’s really worth paying double the price for titanium heaters or just use redundancy on cheaper heaters. In my case if the titanium heaters aren’t going to last it may be worth replacing the eheim or similar heaters which are considerably less money
__________________
300g Basement Reef - April 2018
Reply With Quote
  #2  
Old 02-14-2019, 05:13 AM
Frogger's Avatar
Frogger Frogger is offline
Gold Member
 
Join Date: Apr 2011
Location: Burnaby
Posts: 515
Frogger is on a distinguished road
Default

As I have had a heater fail and somewhat fry my tank I now run multiple smaller heaters on a separate controller to avoid that problem again. Both the controller and heater thermostat would have to fail. With smaller 100 watt heaters one broken heater shouldn't be able to increase the temperature too quick in the tank.

From what I have heard is you should replace heaters once every couple years. I primarily use 100 watt eheim jager heaters and by a bunch of them when they go on sale on Boxing day.

Last edited by Frogger; 02-14-2019 at 05:15 AM.
Reply With Quote
  #3  
Old 02-14-2019, 05:18 AM
H2o2 H2o2 is offline
Member
 
Join Date: Dec 2007
Location: winfield b.c.
Posts: 325
H2o2 is on a distinguished road
Default Heaters

I went to titanium even though they are more money and occasionally they fail but I have had 2-Pro 250 W bust open and take out almost all of my corals. It could have been a power spike but the titanium 1 I had was fine , so even if they fail they don’t crack open I hope and put what ever that stuff is into my tank.
They all make me nervous a bit like you said
Reply With Quote
  #4  
Old 02-14-2019, 02:29 PM
DKoKoMan's Avatar
DKoKoMan DKoKoMan is offline
Member
 
Join Date: Dec 2016
Location: Edmonton
Posts: 1,250
DKoKoMan is on a distinguished road
Default

Quote:
Originally Posted by Frogger View Post
As I have had a heater fail and somewhat fry my tank I now run multiple smaller heaters on a separate controller to avoid that problem again. Both the controller and heater thermostat would have to fail. With smaller 100 watt heaters one broken heater shouldn't be able to increase the temperature too quick in the tank.

From what I have heard is you should replace heaters once every couple years. I primarily use 100 watt eheim jager heaters and by a bunch of them when they go on sale on Boxing day.
I was leaning toward this idea, I have a 300g so I was thinking of buying maybe the 200w or 250w but a bunch of them with a separate controller. I just look at the price being more then 2x for titanium...ugh.

Quote:
Originally Posted by H2o2 View Post
I went to titanium even though they are more money and occasionally they fail but I have had 2-Pro 250 W bust open and take out almost all of my corals. It could have been a power spike but the titanium 1 I had was fine , so even if they fail they don’t crack open I hope and put what ever that stuff is into my tank.
They all make me nervous a bit like you said
I agree that the titanium tube itself will stand the test of time, however is it worth the money when they will all fail? I guess maybe I have been lucky but I have never had a glass eheim Jager break on me.
__________________
300g Basement Reef - April 2018
Reply With Quote
  #5  
Old 02-14-2019, 04:01 PM
FishyFishy!'s Avatar
FishyFishy! FishyFishy! is offline
Gold Member
 
Join Date: Sep 2010
Location: Calgary SE
Posts: 1,674
FishyFishy! will become famous soon enough
Default

I have 2 X Finnex 500W Titanium heaters, with electronic temp control & Guard. For $56 each, you can't go wrong for the price. Although I have usually used them with apex control, I have also used the 150W version on my nano with just their electronic control, and it stays pretty consistent. I have been running all of these on all my systems now for about 3 years and all of them still work well.

I heard that the Cobalt Neo-Therms are very reliable, however at their price point, you could buy 3-4 of the titaniums for that price.

I really think that the Titanium run by an aquarium controller is the way to go.
__________________

They call it addiction for a reason...
Reply With Quote
  #6  
Old 02-14-2019, 04:56 PM
Ace Storman Ace Storman is offline
Member
 
Join Date: Sep 2015
Location: Lake Country, BC
Posts: 39
Ace Storman is on a distinguished road
Default

I have 1 Finnex 500W Titanium heater, with electronic temp control head. I use it as a complete standalone setup, but plug the head into my apex power bar. I set the outlet so that it will turn off should the water temp rise above 2 degrees. Just a bit of a safety feature.
Reply With Quote
  #7  
Old 02-14-2019, 06:38 PM
Frogger's Avatar
Frogger Frogger is offline
Gold Member
 
Join Date: Apr 2011
Location: Burnaby
Posts: 515
Frogger is on a distinguished road
Default

I have a Finnex controller and it runs 6 degrees off right out of the box. It is great at controlling the temperature steady but don't trust the reading. I currently have it set at 84 degrees. I keep all my tanks at 78. I use a Vee Gee digital thermometer to check the precise temperature in all my tanks twice a week. I have done this after I had false readings from glass thermometers and fried a bunch of acropora and killed some fish (lack of O2).
Reply With Quote
  #8  
Old 02-14-2019, 06:50 PM
FishyFishy!'s Avatar
FishyFishy! FishyFishy! is offline
Gold Member
 
Join Date: Sep 2010
Location: Calgary SE
Posts: 1,674
FishyFishy! will become famous soon enough
Default

Quote:
Originally Posted by Frogger View Post
I have a Finnex controller and it runs 6 degrees off right out of the box. It is great at controlling the temperature steady but don't trust the reading. I currently have it set at 84 degrees. I keep all my tanks at 78. I use a Vee Gee digital thermometer to check the precise temperature in all my tanks twice a week. I have done this after I had false readings from glass thermometers and fried a bunch of acropora and killed some fish (lack of O2).
This is why you can never really trust anything out of the box to be honest. I will always go with the titanium element with an external control source.

BRS Investigates actually just had a great video about this. They investigated a bunch of different options. Their best option was the Aquacontroller with a titanium element. You should check it out, it was a good watch.
__________________

They call it addiction for a reason...
Reply With Quote
  #9  
Old 02-14-2019, 07:36 PM
gmann gmann is offline
Member
 
Join Date: Sep 2013
Location: Richmond
Posts: 407
gmann is on a distinguished road
Default

was running 2 x 500 W heaters on a DA controller on big tank

now running aqueon preset heater on frag tank with thermometer for reference check
Reply With Quote
  #10  
Old 02-15-2019, 02:15 AM
babnika babnika is offline
Member
 
Join Date: May 2013
Location: campbell river b.c.
Posts: 61
babnika is on a distinguished road
Default

4x300w eheim controlled by apex. old school but I haven't found anything better
Reply With Quote
Reply

Tags
controller, glass, heater, temperature, titanium


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 11:01 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.