Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Nano Tank Talk

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 02-28-2015, 04:01 PM
Travillion Travillion is offline
Junior Member
 
Join Date: Jan 2015
Location: Vancouver
Posts: 17
Travillion is on a distinguished road
Default Powerhead Placement help

Hey all,
I've been running a 28G Cube for the past couple of months and while everything is doing well, I feel that the powerhead could be in a better placement. The output from the overflow is on the top left side. The LR is built upwards in a pyramid shape nearly centred. Right now I have my powerhead in the top left front, pointing upwards to create surface agitation. My thoughts are this, if I angle my output from the overflow upwards for surface agitation, where should my powerhead placement go?
I will attach a picture shortly for a better idea.
Reply With Quote
  #2  
Old 02-28-2015, 09:48 PM
Dearth's Avatar
Dearth Dearth is offline
No Cookies
 
Join Date: Aug 2012
Location: Prince George
Posts: 1,224
Dearth is on a distinguished road
Default

Personally I would put the powerhead in the bottom third of the tank and angle the powerhead up towards the surface so you get surface agitation and tank flow
__________________
My aquarium is nothing but a smorgasbord for my cats.....
Reply With Quote
  #3  
Old 03-01-2015, 04:48 PM
Travillion Travillion is offline
Junior Member
 
Join Date: Jan 2015
Location: Vancouver
Posts: 17
Travillion is on a distinguished road
Default

Thank you for your suggestions Dearth. Would this be pointed upwards back to front, or upwards front to back? And should I place it on the opposite side of the tanks built in output nozzle?
Reply With Quote
  #4  
Old 03-01-2015, 08:32 PM
Skimmin's Avatar
Skimmin Skimmin is offline
Member
 
Join Date: Jun 2007
Location: Banff
Posts: 254
Skimmin is on a distinguished road
Default

I would have to agree. I had a biocube. If i remember correctly when facing it the output is on the right so point it upward straight ahead and the same with the powerhead on the other side of the overflow. Just place the powerhead lower. That should give you some good stirring in the tank.
Reply With Quote
  #5  
Old 03-02-2015, 02:42 AM
Fishfriend Fishfriend is offline
Junior Member
 
Join Date: Sep 2014
Location: Calgary
Posts: 3
Fishfriend is on a distinguished road
Default Bigger power head

Do you have sand in the tank?

If no, buy a WP-40 and place anywhere in the tank. Point it at the bottom of the tank. It will provide the surface movement that you are looking for. Make sure that the rock structure can handle the amount of flow. I used zip ties for my rock work.

If thats not an option place it in the bottom third of the tank and point up at the top of the tank, not strait up. I would do the opposite of the return.
Reply With Quote
  #6  
Old 03-02-2015, 10:43 AM
Dearth's Avatar
Dearth Dearth is offline
No Cookies
 
Join Date: Aug 2012
Location: Prince George
Posts: 1,224
Dearth is on a distinguished road
Default

as others have said place if possible opposite of any return flow into the tank with a small space like you have you wont have to worry much about too much dead space with an adequately sized powerhead it will aerate the full tank as long as there isn't an obstruction like rock on the glass

Experiment find the best option for your tank you might be surprised where the best flow might be
__________________
My aquarium is nothing but a smorgasbord for my cats.....

Last edited by Dearth; 03-02-2015 at 10:47 AM.
Reply With Quote
  #7  
Old 03-02-2015, 03:48 PM
Travillion Travillion is offline
Junior Member
 
Join Date: Jan 2015
Location: Vancouver
Posts: 17
Travillion is on a distinguished road
Default

Thanks for the input guys.
I have a JBJ wave maker duo controller sitting in the cabinet. Would it be beneficial if I hooked up my circulation pump to that and set it for an X-time on/off schedule?
Reply With Quote
Reply

Tags
circulation pump, nano, placement, powerhead

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 08:32 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.