Profilux II plus aquarium controller - Page 70

Matthias Gross · #**691** 12-14-2007, 06:52 AM

you need 2 splitters and 2 cables "ProfiLux-Tunze 2".

Then L2 would be one pump, L4 the other.
Of course the second channel of your EVG-AP would work synchronously to the pump which is connected to L2, but this is not a problem.

If you don't want this you should insert a card with extra 1-10V-interfaces like the PLM-2L4S or PLM-4L.

egareef · #**692** 12-14-2007, 08:40 AM

Thank you

Tom R · #**693** 12-21-2007, 06:56 PM

Hi Mattias

I just received my Profilux Plus II and have a question.

I am have a small problem with the main Profilux Plus II module. The main screen does not light up. The 5 selection buttons the circle with up and down arrows both light up but the information screen does not. Is there something within the program or the module that I need to do.

Tom Ratcliffe

wrang · #**694** 12-30-2007, 01:13 PM

Any uppdates!?

bullit67 · #**695** 01-01-2008, 12:47 AM

OK I give up I want to update my firmware but I can not connect to my Profilux I have tryed using the LAN connection with no luck I then went out and picked up a USB too RS232 (serial) adaptor and still no luck any one have any ideas I have been working on this all day today and this isant the first day I have wasted trying to get this to work. The profilux is still using the origanal firmware from when I got it last year ver.2.03

any help would be great

Doug

bullit67 · #**696** 01-01-2008, 12:57 AM

OK it never fails just when I decide to give up I try one last time change a 1 to a 2 and hey what do you know it works

egareef · #**697** 01-03-2008, 11:32 AM

Hi,

here it is: new firmware version 3.07

What news features has been introduced?

Regadrs

Siiri · #**698** 01-07-2008, 10:39 PM

Hi...

Two queries...

1. I would like to update my firmware from it's current 3.04 to 3.06. To do this do I have to update to 3.05 first or can I go straight to 3.06 ?

2. In the future will it be possible to utilise more than 8 x 1-10v interfaces ?

Thanks for any info.

Siiri

Matthias Gross · #**699** 01-08-2008, 06:14 AM

@egareef:
in 3.07 we reprogrammed the calculation conductivity <-> salinity <-> density (we made it more precisely with more digits behind the decimal point) and we changed the displayed texts during calibration of the cond. probe

@Siiri:
1. you always can go straight doing an update
2. I don't think so. For what would you need that?

Siiri · #**700** 01-08-2008, 06:42 AM

Thanks for the swift reply Matthias !!!

I actually have successfully updated my firmware already...

I was just wondering about the number of 1-10v interfaces as I was considering getting your LED Spot Simu and that would take my total to 9 interfaces when I have everything up and running. Thats 4 for lights, 2 for pumps, 1 for fans, 2 for LED Simu. I have decided not to do this as my lights should be able to do all except Lightning which is really a novelty function anyway.

Thanks Again...

Siiri