Jebao WP to Apex harness

[Torx]

I have parts to build 3 single WP harnesses or 1 x 2 pumps and a single.

$25 for a single
$40 for a double.

The one in the picture is a double that runs a WP-25 and WP-40 in my tank.

Located in Blenheim, will ship.



Sent from my SGH-T989D using Tapatalk

[jordsyke]

ill take the double, it will hook up to 2 wp40s? can they still be on different sides of a 4' tank

[Torx]

Originally Posted by jordsyke

ill take the double, it will hook up to 2 wp40s? can they still be on different sides of a 4' tank

My WP-25 and WP-40 are on opposite sides of my 5' 120gallon tank. My Apex is in my cabinet below the tank. The one that I will make for you has a 3' black Ethernet cord as well, so more then long enough for your tank. If you are not picky on color, I also have those baby blue and off green cords as well.

If interested, PM my your info so I can get some shipping prices.

On a side note, if there is lots of interest, I will order more parts to make them for anyone interested.

[ronau]

I will take 2 doubles if I can control everything independently. I need to check my controllers for my return pump and skimmer pump to make sure they take the same signal.

[Torx]

Originally Posted by ronau

I will take 2 doubles if I can control everything independently. I need to check my controllers for my return pump and skimmer pump to make sure they take the same signal.

1 double will control 2 items seperately/independently through one VSP.

I will order more supplies when I get home and reply to PM's then as well.



Sent from my SGH-T989D using Tapatalk

[Torx]

Double is spoken for.

Single still available at this time.

I have ordered more parts, so feel free to keep the PM's rolling and I answer as many questions as possible. Will most likely be 2 weeks for new parts. If there are a few who want to order together to save shipping, that is okay too. After all, I would if I could

[kacairns]

Are these cables made so they convert the 0-10v from the apex to 0-5v for the jebao pump?

[Torx]

Originally Posted by kacairns

Are these cables made so they convert the 0-10v from the apex to 0-5v for the jebao pump?

Correct. The cable converts the 0-10v that the Apex puts out to a 0-5v signal for the Jebao pump.

[Steel_Wind]

This question has been asked many times on Reef Central, Manhattan etc.. Never has there been a specific or satisfactory response.

I'll try anyways

Will this cable work with a Reefkeeper's 0-10v pump controller? RKL/RKE or otherwise?

[Torx]

Thanks for the kind words and feedback. You may need to definitely adjust those profiles I sent depending on your tank size. I have had some crazy waves in my 120 lol.
I do have some left if there is anymore interest.

Sent from my SGH-T989D using Tapatalk