Help picking an Apex controller

[tinman]

Originally Posted by habs247

This has me thinking. Would this mean i would be able to control my existing tunze ATO with the Neptune?

nope....well you could turn it on and off at certain times i guess. what i meant is you can control the 6055 and other controllable tunze circulation pumps with the 0-10 volt and make all your profiles . for me i dont run a tunze topoff system i just installed a float switch in my sump connected to the apex and just plugged my ato pump into the appropriate socket and with alittle programing and a virtual outlet or 2 you have an ato. i use one float switch in my ato water container so i dont run the pump dry and one in the sump to look after the sump level, when my ato container gets too low, apex shuts down the socket the pump is plugged into and sends me a message to my phone and wont do anything till i fill the container. this system has worked very well for me, it may not be useful for everyone, just my 2 cents, and if you are real crafty you can program the apex to perform water changes as well, this feature i really love!