Jebao Twins Controller (dual pump controller)

[nrosdal]

I just received one of the first Jebao Twins controllers the other day and wanted to let everyone know how it is working and what the features are like on it.

Here is a picture of it in action:



It is running a wp 25 and a wp40 in my 120 gallon tank. Initially i was thinking i would hook it up and it would allow both pumps to alternate and make a really cool wave. It turned out to have an alternating mode that didn't make such a great wave(because the interval time only dials down to 1 second of run time on each pump which was still a bit to much for my little 4 footer). But what it did was make a very nice alternating current that my corals really seem to like running for a few seconds (up to 2 minutes if wanted) going from side to side.

Will post more tomorrow as it is getting late. But here are the description of the modes. If you are wondering anything please feel free to ask.


MODE/NIGHT: Press the “MODE” button once to select the function, long press to enter into Night mode.

FEED/LOCK: Press the “FEED” button once to get into 10- min feed mode, long press to lock the knob.

P1_FLOW: Setting the flow rate of P1 Pump.

P2_FLOW: Setting the flow rate of P2 Pump.

W1: WAVE(Orginial Wavebox Functin): Adjust the period of wave mode to your desired wave.
INTERVAL: Adjust switching mode to switch the period.

W2: WAVE MAKING and FLOW MAKING combined MODE (WaveBox Function + Stream Mode)
P1 is WAVE MAKING mode and P2 is FLOW MAKING mode. You can select the wave pattern by turning WAVE knob and adjust FLOW RATE by selecting P2 FLOW.

W3: SINE mode (Reef Stream Mode)
Power of P1 and P2 is floating between 30% and 100% under this mode, this flow rate looks like a sine curve.

ELSE: Random mode (Reef Stream Mode)
It’s irregular mode that power of P1 and P2 is changed continuously as a random value.

H. Steady Flow mode

P1 and P2 can achieve constant flow rate by adjusting P1 FLOW and P2 FLOW

C Switch to Flow make mode. (New Function)
P1 and P2 can switch to cycling flow make in this mode. P1 work, P2 stop–P1 stop, P2 work–P1 work, P2 stop and repeating the cycling by adjusting P1_FLOW” 、 “P2_FLOW

Night mode: Start NIGHT mode by pressing the MODE/NIGHT button for long, with“NIGHT” yellow indicator shows entering into NIGHT MODE. It will work normally during the daytime and switch to NIGHT MODE during the night in which mode P! And P2 work as the least the flow rate

FEED function:Press FEED/LOCK button, the blue indicator light “10 min” illuminate, the wave maker stop working and water is static for fish eating. It will enter into the start mode before feed mode in 10 minute. If it is needed to return back into Start during feeding, press FEED/LOCK button and 10min indicator light will turn off.

LOCK button parameter adjusting” Press FEED/LOCK button for long until LOCK red indicator illuminates, which means the parameter is fixed. The knob will not change the wave pattern. It is being so to prevent the wave pattern changed by un-intention. Press FEED/LOCK button for long to adjust the wave pattern until the red indicator light turns off