Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Product Review and Equipment Forum > Pump Specific

Reply
 
Thread Tools Display Modes
  #1  
Old 08-28-2016, 09:26 PM
input80 input80 is offline
Member
 
Join Date: Oct 2012
Location: Surrey BC
Posts: 298
input80 is on a distinguished road
Default Reef Plumbing Experts?

I have a couple of questions for the experts in here:
1) can a Bean animal work correctly with 2x1.5" & 1z3/4" holes, or do they all have to be the same size?
2) with 3/4" bulkheads (returns), would it be fine to run 1" from the pump then reduce to 3/4" at the bulkheads & run a 3/4" pipe into the tank? or can I go 1"--> 3/4" at the bulkhead-->1" into the tank?
__________________
Ian~
Reply With Quote
  #2  
Old 08-29-2016, 01:20 AM
vanreefer's Avatar
vanreefer vanreefer is offline
Member
 
Join Date: Aug 2004
Location: S Surrey/W.Rock
Posts: 649
vanreefer is on a distinguished road
Default

Quote:
Originally Posted by input80 View Post
I have a couple of questions for the experts in here:
1) can a Bean animal work correctly with 2x1.5" & 1z3/4" holes, or do they all have to be the same size?
2) with 3/4" bulkheads (returns), would it be fine to run 1" from the pump then reduce to 3/4" at the bulkheads & run a 3/4" pipe into the tank? or can I go 1"--> 3/4" at the bulkhead-->1" into the tank?
1) it can work... how much does your return pump move/ hr? That will dictate if u use the 3/4" as part of 2 active drains or the emergency... If u use it as the emergency it may not be able to handle the flow.

2) reducing to 3/4 will restrict flow... After it is reduced it doesn't really matter if u stay at 3/4" or upsize to 1". Going back to 1" will result in more gentle flow at the outlet.
Cheers 😉
Reply With Quote
  #3  
Old 08-29-2016, 02:55 AM
input80 input80 is offline
Member
 
Join Date: Oct 2012
Location: Surrey BC
Posts: 298
input80 is on a distinguished road
Default

1)definitely not thinking the 3/4 for emergency
__________________
Ian~
Reply With Quote
  #4  
Old 08-29-2016, 02:57 AM
Lampshade's Avatar
Lampshade Lampshade is offline
Member
 
Join Date: Aug 2009
Location: Abbotsford
Posts: 629
Lampshade is on a distinguished road
Default

Vanreefer nailed it.

I've generally found that anytime i go from a smaller pipe to a larger pipe in a return line you end up with micro bubbles. There is probably a way to reduce this with proper adapters, but general PVC ones have always given me micro bubbles.
__________________
My 150 In Wall Build
Reply With Quote
  #5  
Old 08-29-2016, 03:07 PM
Myka's Avatar
Myka Myka is offline
Moderator
 
Join Date: Mar 2004
Location: Saskatoon, SK.
Posts: 11,268
Myka will become famous soon enough
Default

The answer to #2 really depends on how much flow your return pump pushes. Check the manufacturer recommendations (should be in the instruction manual) to make sure that they recommend flow through 3/4". Usually the size of the outlet on the pump is a good sign - if it is a 1" outlet, chances are the manufacturer recommends 1" all the way from the pump to the tank with no restriction. The best bet if you can't find the information in the manual is to email the manufacturer for confirmation - most of them will reply to you within a few days.
__________________
~ Mindy

SPS fanatic.

Reply With Quote
  #6  
Old 08-29-2016, 07:10 PM
input80 input80 is offline
Member
 
Join Date: Oct 2012
Location: Surrey BC
Posts: 298
input80 is on a distinguished road
Default

Thank you Mindy, Unfortunately, the return holes in the overflow are already 3/4"; as I believe I went this route because loclines only go up to 3/4"? The pump is a Jebao/Jecod DCT-15000.
__________________
Ian~
Reply With Quote
  #7  
Old 08-29-2016, 10:18 PM
Myka's Avatar
Myka Myka is offline
Moderator
 
Join Date: Mar 2004
Location: Saskatoon, SK.
Posts: 11,268
Myka will become famous soon enough
Default

Quote:
Originally Posted by input80 View Post
Thank you Mindy, Unfortunately, the return holes in the overflow are already 3/4"; as I believe I went this route because loclines only go up to 3/4"? The pump is a Jebao/Jecod DCT-15000.
Sorry I don't know anything about the Jebao line, and I don't think you'd be able to get a response from them either, but you could try! You're probably ok as long as you run the 1" all the way to the bulkhead (it has 1" output right?). That said, I'm not the manufacturer.
__________________
~ Mindy

SPS fanatic.

Reply With Quote
  #8  
Old 08-29-2016, 10:26 PM
Ryanerickson's Avatar
Ryanerickson Ryanerickson is offline
Member
 
Join Date: Oct 2012
Location: Mission, BC
Posts: 703
Ryanerickson is on a distinguished road
Default

Run 1" too the tee where they split to either bulkhead. outta the 1" tee use bushings to reduce down to 3/4 run the 3/4 to the bulkheads.after the tee the flow is cut in half no need for 1" all the ways to bulkhead unless there is only one return hole and in that case there's no tee.
Reply With Quote
  #9  
Old 08-29-2016, 11:41 PM
Myka's Avatar
Myka Myka is offline
Moderator
 
Join Date: Mar 2004
Location: Saskatoon, SK.
Posts: 11,268
Myka will become famous soon enough
Default

Quote:
Originally Posted by Ryanerickson View Post
Run 1" too the tee where they split to either bulkhead. outta the 1" tee use bushings to reduce down to 3/4 run the 3/4 to the bulkheads.after the tee the flow is cut in half no need for 1" all the ways to bulkhead unless there is only one return hole and in that case there's no tee.
Agreed. I was assuming a single return.
__________________
~ Mindy

SPS fanatic.

Reply With Quote
  #10  
Old 08-30-2016, 07:44 PM
input80 input80 is offline
Member
 
Join Date: Oct 2012
Location: Surrey BC
Posts: 298
input80 is on a distinguished road
Default

I'm not too sure that this belongs under pump specific, as it is not restricted to a pump?
__________________
Ian~
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 12:16 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.