FS-Edmonton Area-tank shut down.

[The Codfather]

Well the tank is down so I guess equipment is next, everything is in very good condition, I will have everything cleaned and ready to go. please feel free to test any equipment while you are there. Please keep in mind that as there is always room for movement on prices, but I will simplily ignore lowballs. Best way to reach me is on my cell, please call/text me and I will get back to you. I know there has already been a pile of people sending me pms on what they want, I do have a list started, and will proceed with it. Be aware that if you do not get back to me within a certain time frame, I move on. If you want to swing by, Im not really available until thursday(but will answer any questions) as the kids and night classes are going to keep me quite busy til then. I can send pictures by text upon request. 780-718-7805
Thanks,
Bob

Lighting/equipment
3-5' Sunbrite F1 series(version2) fixtures-$600/each
2-Vertex moceans- Ive modified the inlet with a 1" three piece ball valve. I have recently, pulled and cleaned the gears, and relubed. both work flawless.-$150/each
2-vertex Rx-U 2.0 media filters(1 BNIB)-$110/each
1-vertex Rx-Z 3.0L Zeo reactor-$200
1-BK super marine 300(2 years old), complete with vertex self cleaning head and avast marine locker/pressure switch-$1500
1-Vertex RX-6 Duo Calcium reactor, Motor was reploaced a few months back, have an additional brand new motor as well, complete with small feed pump, 10 lb CO2 cylinder(full), regs. and enough course/fine media for at least a full refill of primary chamber-$725
1-10 lb CO2 cylinder(full, and recently certified) complete with new milwaukee regs, solenoid, and bubble counter-$175
1-50 gal breeder drilled with left hand overflow, and 2 3/4" inlets-$100

1-Profilux 3 EX(best controller I have ever owned) package includes:
-big box of cords(theres lots, trust me, tunze cords etc etc)
-1-4 pump doser
-salinity probe
-pH prob
-Orp prob
-temp probe
-calibration fluid
-3-6D outlet power bars
-float switch
-4 wp 25 pumps(modded clamps to fit on bulkheads) with mod box for control
I will part out the profilux if enough interest for everything is there-$1500

Multiple smaller pumps
200w, 250w and 300w Heaters

I think these are the big items, as I start to sort out what else I have I will post it up as well. Glass for a huge tank and sump will be posted soon.
Thanks,
Bob

[MarkoD]

Pm d for 50 gal tank

[The Codfather]

50 gal sold
1 sunbrite F1 sold
Thanks Bo

[The Codfather]

Remaining 2 sunbrite F1 series pending -Chris

[The Codfather]

Ive had a few pms, please if you want something, confirm.
Im heading down the list in which I receive.
Thanks

[The Codfather]

bump

[Rtilly]

Pm sent

[fragman101]

Pm sent

[tangaroo]

Codfathers stuff is mint thanks for everything.

[The Codfather]

Originally Posted by The Codfather

Lighting/equipment
2-Vertex moceans- Ive modified the inlet with a 1" three piece ball valve. I have recently, pulled and cleaned the gears, and relubed. both work flawless.-$150/each

1-vertex Rx-U 2.0 media filters(1 BNIB)-$110

1-vertex Rx-Z 3.0L Zeo reactor-$200

1-BK super marine 300(2 years old), complete with vertex self cleaning head and avast marine locker/pressure switch-$1500

1-Vertex RX-6 Duo Calcium reactor, Motor was reploaced a few months back, have an additional brand new motor as well, complete with small feed pump, 10 lb CO2 cylinder(full), regs. and enough course/fine media for at least a full refill of primary chamber-$725

200w, 250w and 300w Heaters

Updated
I'll get the rest up this weekend if I get some time.
Thanks,
Bob