265 gallon setup - Page 5

niloc16 · #41 09-18-2006, 06:24 AM

thanks chin i'll do that

niloc16 · #42 09-26-2006, 03:08 AM

i know this thread is going a little slow but i may have the tank upstairs this week, crossing my fingers. but i completed to skid with chin's ideas, i'm glad i did it now. here is the updated pics of the skid

niloc16 · #43 09-28-2006, 12:27 AM

i got my new skimmer today, it is H&S 200-1260 fits nicely in the stand with an inch to spare to remove the cup

Jason McK · #44 09-28-2006, 01:30 AM

SWEEEEET

niloc16 · #45 09-28-2006, 06:06 PM

well after sleepless nights wondering how the hell i was going to move this beast it is done. the skid worked well, needs to be modded a little bit. the tank slid on the skid a little bit until the tie downs twisted a little but some sort of bracket needs to be installed at end to keep tank from sliding. although i will NEVER move this tank again, if need be it will be sold with the house or disassembled in the house and removed that way. lol. it was nuts, but we did it. and a major thank you to the boys at hidden reef mark, kelly, mike and a customer ray for their help, i could not have moved this without them. the tricky part was getting the tank from the front door onto the stairs, once it was there it was just brute force and ignorance to push and pull the tank up. 2 guys at the top with ropes wrapped around their waists pulling and three of us at the bottom pushing. using the melamine for a base of the skid was nice because it slid easily. also i need to design a 'ski' for the front because the half round trim was a little tricky while trying to get it on the stairs. should be plumbed by wednesday and i'll update when it is done, i have to work for the next 5 days so i wont be able to do much to it.

Dale · #46 09-28-2006, 08:09 PM

Good for you colin!!!

I've admired your tank often when visiting the shop - and wondered how in the H anyone would move it.
I was a weeny when it came to my tank and paid Mike and the boys to deliver

Best 5 bucks I ever spent!
________
TXR312M

niloc16 · #47 10-04-2006, 03:35 AM

i completed my pvc structure for my rock work. i want a very open plan with lots of archways and crevices. i also plumbed my ro unit to a tap today. tomorrow morning the tank will be plumbed and i'll update then with some pictures hopefully. heres a few from today
the full tank

left side

right side

and the timer and plumbing i did for the RO/DI

robzilla · #48 10-04-2006, 04:05 AM

where did you get the timer for the ro unit?

niloc16 · #49 10-04-2006, 04:19 AM

i got it from fraser valley building supplies, i believe it is also ace hardware.

robzilla · #50 10-05-2006, 12:51 AM

there's a reducer to 1/4 on the end?