Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Tank Journal

Reply
 
Thread Tools Display Modes
  #21  
Old 02-19-2014, 02:46 AM
WarDog's Avatar
WarDog WarDog is offline
Darth Moderator
 
Join Date: Mar 2013
Location: Maple Ridge, BC
Posts: 3,111
WarDog will become famous soon enough
Default

Picked up the stand today... a day of highs and lows. Firstly the stand looks great. Happy with the powder coating even though I wanted white, but he didn't have.
Stupid me, I didn't measure it until I got it home. 1 inch short in width. 18 1/2 instead of the requested 19 1/2. Tank is only 18 3/8 but I am worried about the bulkheads
clearing the inside of the frame. Going to do a mock up when the wife comes home and can help move the tank. Fingers crossed!
Also, the threads on the bottom for the adjustable feet need to be re-tapped.
48" x 18 1/2 x 35" tall. Lots of inside height.

Reply With Quote
  #22  
Old 02-19-2014, 03:09 AM
Madreefer's Avatar
Madreefer Madreefer is offline
Member
 
Join Date: Nov 2008
Location: Prince George
Posts: 2,064
Madreefer is on a distinguished road
Default

Good choice in stand height. It's sure nice not having to bend over to look at your tank. Top of my tank stands over 6' tall. Only negative thing is having to stand on a chair or ladder to work inside of tank.
Reply With Quote
  #23  
Old 02-19-2014, 06:45 AM
The Guy The Guy is offline
busy with fresh water.
 
Join Date: Dec 2011
Location: Kelowna, BC
Posts: 1,041
The Guy is on a distinguished road
Default

Nice stand, you could always add a finished piece of plywood to give you the extra 1" you need, it would look just fine if you trim the plywood edge. The height is great, mines 37" high, nice for viewing, but as Bill said you need a small ladder to do the work in the tank but it's no big deal. keep the pictures coming.
__________________
Hey! I never "LEFT" the hobby, just doing fresh water now. Which is still listed as part of Canreef if I'm not mistaken.
Reply With Quote
  #24  
Old 02-19-2014, 06:56 AM
WarDog's Avatar
WarDog WarDog is offline
Darth Moderator
 
Join Date: Mar 2013
Location: Maple Ridge, BC
Posts: 3,111
WarDog will become famous soon enough
Default

Quote:
Originally Posted by The Guy View Post
Nice stand, you could always add a finished piece of plywood to give you the extra 1" you need, it would look just fine if you trim the plywood edge. The height is great, mines 37" high, nice for viewing, but as Bill said you need a small ladder to do the work in the tank but it's no big deal. keep the pictures coming.
Thanks Laurie. After testing the tank on the stand, the bulkhead just clears the inside of the frame, that was my main concern. The height is great, it will really be the centrepiece of the room. LOTS of vertical space inside the stand for extra gear.
I will need one of those 2 step folding ladders for sure! Lol.
Reply With Quote
  #25  
Old 02-19-2014, 04:59 PM
The Guy The Guy is offline
busy with fresh water.
 
Join Date: Dec 2011
Location: Kelowna, BC
Posts: 1,041
The Guy is on a distinguished road
Default

Quote:
Originally Posted by WarDog View Post
Thanks Laurie. After testing the tank on the stand, the bulkhead just clears the inside of the frame, that was my main concern. The height is great, it will really be the centrepiece of the room. LOTS of vertical space inside the stand for extra gear.
I will need one of those 2 step folding ladders for sure! Lol.
Those ladders work great, but get the one with wide steps there a lot sturdier to stand on and only a few bucks more in cost. Are you coming to the frag meet on March 1? Should be a lot of fun with lots of reefers there.
__________________
Hey! I never "LEFT" the hobby, just doing fresh water now. Which is still listed as part of Canreef if I'm not mistaken.
Reply With Quote
  #26  
Old 03-23-2014, 11:19 PM
WarDog's Avatar
WarDog WarDog is offline
Darth Moderator
 
Join Date: Mar 2013
Location: Maple Ridge, BC
Posts: 3,111
WarDog will become famous soon enough
Default

Opps... look what I did. Good thing I've got a drill and a tap kit.



Added some fuzzy 'anti-scratch my wicked hardwood floor' sticky things.

Reply With Quote
  #27  
Old 03-23-2014, 11:37 PM
WarDog's Avatar
WarDog WarDog is offline
Darth Moderator
 
Join Date: Mar 2013
Location: Maple Ridge, BC
Posts: 3,111
WarDog will become famous soon enough
Default

Just finished setting up a quarantine tank. It will however need to house my Texas Cichlid Sheldon while I can move (and clean the crap out of) his tank.
Once he is moved, or dies (that dude is like 7 years old) I can pull out the gravel and add FSW.
It's an all-new 20 gal standard and the PVC is 4".



Reply With Quote
  #28  
Old 03-23-2014, 11:42 PM
mike31154's Avatar
mike31154 mike31154 is offline
Member
 
Join Date: Jul 2008
Location: Vernon
Posts: 2,073
mike31154 will become famous soon enough
Default

Before the 'electrical' part of this thread gets buried any further, I'll weigh in with a couple of things if I may! A dedicated outlet for the tank is never a bad idea, actually two would be better and most importantly, GFI protected as you're dealing with H2O. That nice titanium grounding probe you picked up at J&L is no substitute for the safety of GFI protection. Open a wall if that's what you need to do, or have the tank closer to the 'nook' location if that's feasible. I'd advise against running an extension cord if at all possible. Chances are you'll be using a power bar or two in order to have enough outlets for all the stuff typically required to keep the tank going. Power bars already have an extension on them & daisy chaining that with another extension cord is against code I believe. In any case, it's a potential hazard.

Fine looking build so far! Now's the time to get the electrical right, not after it's full of water & livestock.
__________________
Mike
77g sumpless SW
DIY 10 watt multi-chip LED build http://www.canreef.com/vbulletin/showthread.php?t=82206
Reply With Quote
  #29  
Old 03-24-2014, 12:29 AM
WarDog's Avatar
WarDog WarDog is offline
Darth Moderator
 
Join Date: Mar 2013
Location: Maple Ridge, BC
Posts: 3,111
WarDog will become famous soon enough
Default

Quote:
Originally Posted by mike31154 View Post
Before the 'electrical' part of this thread gets buried any further, I'll weigh in with a couple of things if I may! A dedicated outlet for the tank is never a bad idea, actually two would be better and most importantly, GFI protected as you're dealing with H2O. That nice titanium grounding probe you picked up at J&L is no substitute for the safety of GFI protection. Open a wall if that's what you need to do, or have the tank closer to the 'nook' location if that's feasible. I'd advise against running an extension cord if at all possible. Chances are you'll be using a power bar or two in order to have enough outlets for all the stuff typically required to keep the tank going. Power bars already have an extension on them & daisy chaining that with another extension cord is against code I believe. In any case, it's a potential hazard.

Fine looking build so far! Now's the time to get the electrical right, not after it's full of water & livestock.
I totally hear you mike31154, thanks for the honest input. Other than my wife's fury the only thing that scares me is electrical. As a gasfitter I am certified to work on low voltage circuits, but that's not the same as 110V. I work next to Electricians all the time and pick their brains constantly for info. This however is not the same as being a qualified journeyman. I am planning to replace the plug behind the tank with a GFI one. I am also planning on testing all the appliances on the living room circuit for their amp draw. If all else fails, I think I can tap into the nook circuit and run some BX shielded line behind the baseboard without having to open up the wall. I also have a dedicated circuit outside the house (going to the detached garage) just below the tank. This line exits the house, goes into a exterior junction box and carries on to the garage in underground PVC. It's 20 amps. We don't use the garage (rented out as storage) and the line is disconnected because of yard reno's. Thankfully I have a few option to make the tank all safe!
Reply With Quote
  #30  
Old 03-24-2014, 05:38 AM
mike31154's Avatar
mike31154 mike31154 is offline
Member
 
Join Date: Jul 2008
Location: Vernon
Posts: 2,073
mike31154 will become famous soon enough
Default

Although the garage circuit seems to be an alternative, if you look into the code requirements, outdoor circuits are dedicated outdoor circuits! If I remember correctly, there are even restrictions on keeping a carport or garage lighting circuit separate from the outlet circuit. Could be wrong there, I need to check the little cheat book I have from PC Knight, the Electrical Code Simplified, BC edition. Available at most hardware stores for about $20. A pretty good investment to keep you out of trouble. Of course there's no substitute for hiring a qualified tradesman! Your electrician pals should be able to steer you in the right direction.
__________________
Mike
77g sumpless SW
DIY 10 watt multi-chip LED build http://www.canreef.com/vbulletin/showthread.php?t=82206
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 11:28 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.