Is this going to hold

[damtrees420]

so i got a 428 gallon 84x42x28 and my buddy is making a stand out of 1 1/4 square tubing going to have 6 legs so it will be 3.5 ft to each leg with 1 inch plywood on top is it going to be enough to hold the 4000 pounds or so only going 28 inch tall so it can fit in a door with out having to come apart made like all the rest of the stands with a top and bottom with 6 legs going up

[sphelps]

what size wall will the tubing have?

[damtrees420]

3 1/16

[The Grizz]

I would use at least 1 1/2" x 1 1/2" x 3/16 (.188) HSS if not 2 " x 2".

[Skimmerking]

Originally Posted by The Grizz

I would use at least 1 1/2" x 1 1/2" x 3/16 (.188) HSS if not 2 " x 2".

yup and This guy would know

[sphelps]

Without going into too much detail I ran half the frame with half the weight using A36 steel in the size you're planning and you barely get a safety factor of 2, typically for this application I like to see 5 or more. 2" with a .25 wall will give you close to 5 following the same stand design/layout.

HTH