Selling entire SPS system.

[eposer]

I'll be posting a complete description of the system with pictures tomorrow. I'm going to wait at least a week before I consider parting it out but have noted who was interested in what and will let you all know when/if the time comes to part it out.

At least I'll still have my 15g cube http://www.canreef.com/phpBB2/viewtopic.php?t=8370

Thanks,
Evan

[Canadian Man]

If you do part it out do I get first dibs as I was first to post

[AJ_77]

Dibs, hah... he had 12 private msgs before you even read his post.

[ldzielak]

If the lights are not spoken for I could use bulbs, ballasts reflectors...

Lee

[eposer]

Here is a more detailed description of the tank, stand, and lighting fascia...

The tank is all 1/2" glass with a starphire front pane. Dimensions are approx 5' wide 2' deep and 3' from the front to the back of far back of the overflow. All the glass is beveled and polished and there is a 3" euro brace across the front and 11" triangles in the front corners. All excess silicone has been shaved away leaving clean crisp seams(took about 5hrs to do this! but was worth it for the look). There are 2 1.5" overflows(one running at full throttle with a ball valve and the other as abackup) in the rear triangular overflow box and a 1.5" return pipe that splits into a Y and runs along the rear sides of the tank with 3 3/4" adjustable returns on each side.

The stand is primarily 3/4" MDF with a 1" X 2" steel beam across the front so that when the doors are open there is no center brace allowing for full access to under the stand. The inside is painted with black marine epoxy to seal it and the outside is finished in black formica with a slight leather texture and stainless steel handles. I used 170 degree hinges on the doors so they open all the way out. there are sprung magnetic latches holding the doors closed so with the push of a finger they pop open.

The top facia is an MDF frame with a 1/8" hardboard skin and the same black finish as the stand. It has a lip that rests on the eurobracing and extends down 3/4" in front of the tank to hide the seam of the bracing and the waterline.

I will post more details on equipment and livestock later.

Thanks,
Evan

[SuperFudge]

Hello evan,

If u decide to part it out, can you place me down for the Octopus ?

Thanx, Marc.

[eposer]

Here are some quick movies I just took this morning. The lights had only been on for about 5 minutes so not everything's fully open but you'll get a general overview of the tank contents.

Relatively large movie files that require the quicktime player to view...

http://www.curecreative.com/pics/120forsale/tank_01.MOV ~18MB

http://www.curecreative.com/pics/120forsale/tank_02.MOV ~18MB

Evan.

[victornguyen]

would you sell the tank and stand by itself?? if so how much.

[eposer]

The entire system is sold.

Thanks,
Evan.

[Stretch]

Wow Congrats