|
|
|
#11
12-10-2003, 09:48 PM
|
||||
|
||||
Scales bear with me and I'll try to find out where I got the acrylic and the needle valve. The needle valve came from a place just off 1st ave in Burnaby, almost at Gilmore. The acrylic tube came from a place over by the coke dist center under the port mann bridge. Sorry I can't remember names.
I don't have any acrylic left, I made a bunch of bubble counters and other stuff. I think the length was $10 maybe less, the 4" stuff was $60 for 6 feet. Larger stuff is harder to get, this place told me that you can only get larger diameter acrylic in cast which makes the price increase about 4 or 5 fold (IE 6feet for $300). 
|
|
#12
12-10-2003, 10:00 PM
|
||||
|
||||
|
Thanks for your help.
If you remember the names, particularly the acrylic place, let me know. Cheers. Trevor
__________________
Life is far too short not to buy the stuff you know you are going to get in trouble for....
|
|
#13
12-13-2003, 05:54 AM
|
||||
|
||||
|
Sorry I took so long, here you go.
Acrylic tubing was from GE Polymer shapes (604) 468-2112 Needle valve was from Peerless engineering (604) 659 4100 PN KLN230B
|
|
#14
12-13-2003, 02:36 PM
|
|||||
|
|||||
|
I am using a flow regulator instead of a Pressure regulator on mine. I still use a bubble counter though.
Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
Linear Mode
