![]() |
|
#1
|
|||||
|
|||||
![]() |
#2
|
|||||
|
|||||
![]() If anyone is interested, I'll probably be making a custom order for the 4-LDD pcb boards with the pull down resistor jumper that rrasco made on the RC thread. PM me if you interested in any of the boards...
|
#3
|
||||
|
||||
![]() Quote:
![]() New LEDs for the main tank coming it the summer! Whoooo! |
#4
|
||||
|
||||
![]() Quote:
GND - ground IN1 to IN8 - Arduino outputs Take a jumper, connect to GND and to any of the IN1 to IN8 inputs. You should hear the relay latch. |
#5
|
||||
|
||||
![]() Quote:
These changes will work. Low = on and high = off. Intermittently, this logic used to turn the relay on & off will work backwards because of the opto-iso. Jamie does have a SSR (solid state relay) setup which is installed & wired directly behind the outlet. This setup is the most stable and the quietest - SSR don't make the mechanical latching sounds. I hope this helps! |
#6
|
||||
|
||||
![]() Is anyone have LDD-350H drivers spare? Would be nice if I could have three.
Thanks, Kevin
__________________
Wow! That's Crazy! Why would you spend that much and go through all that trouble? ![]() |
#7
|
|||||
|
|||||
![]() Quote:
Scubasteve: Sweet, thanks! |
#8
|
||||
|
||||
![]() Ya, I have the same things (700 & 1000).
__________________
Wow! That's Crazy! Why would you spend that much and go through all that trouble? ![]() |
#9
|
|||||
|
|||||
![]() Well again another very early morning thanks to the ever so diligent crows and robins
![]() Oh, well, might as well do something constructive. This is what my office now looks like, lol ![]() And I got everything hooked up and it seems to be running, yaaaaaaay ![]() The Arduino up and running the code: ![]() And a shot of the panel box everything is mounted in temporarily: ![]() I'm still waiting for my amphenol connectors that's why everything is only temporarily connected. I couldn't think of another way to test fire everything at once to make sure it all worked together. I also want to get this thing over my 77 gal and see if it has a positive effect on the coral and algae I just can't seem to kick. I do have MH bulbs that are 8 months old or so and at this point I'm not buying bulbs with this thing so close to operational. I also have not finished my fan circuitry so right now the fans are not running on my heatsinks so that's next on the priority list. I also have to fine tune the Arduino code because I have a couple channels used that the original code was using for sump lights and such that I'm not using. So I have to figure that out. Anyway, that's an update for now. Hope ya'll enjoy. It appears to be getting lots of views but it's so quite in here ![]() |
#10
|
||||
|
||||
![]() Quote:
Mine took about 2-1/2 weeks to arrive. I do suggest ordering than what you need simply because they're so cheap!!! |