#1
|
|||||
|
|||||
Humidity controller for apex
Hi
I am wondering what humidistat people are using with their apex systems via breakout box to control a ventilation fan... Cheers VR |
#2
|
||||
|
||||
I have not. But just an opinion.
Any mechanical style humidistat would work . The ones off humidifiers . Set it at 40 % wire it as you would a float switch to the breakout box .The humidistat are usually normally open. Then Program an outlet when switch closed to on .this will activate the dehumidification. Fan , Hrv, furnace fan . Anything. I'd add a 5 Minuit delay on reactivation |
#3
|
|||||
|
|||||
I just wired an exhaust fan directly to a typical household humidistat because I couldn't think of any reason why I wouldn't want to have the room purged when the humidity gets too high. I have a separate cooling fan controlled by the Apex for when the tank gets too warm.
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft Old 120gal Tank Journal New 225gal Tank Journal May 2010 TOTM The 10th Annual Prince George Reef Tank Tour |
#4
|
|||||
|
|||||
Quote:
Thanks |