|
#1
|
|||||
|
|||||
The RW15s sound like they're playing a bad song running with jebao controlers. Controlling with my profilux now, but they keep stopping for no reason. If I unplug the network cable from the adapter and plug it back in they start up again. It's difficult to troubleshoot. Lots of flow through.
|
#2
|
|||||
|
|||||
I have had The WP-25 and now a pair or RW-8 and never an issue with either
Last edited by jorjef; 12-31-2015 at 01:40 AM. |
#3
|
|||||
|
|||||
Quote:
__________________
Brad |
#4
|
|||||
|
|||||
Don't forget to order a 3rd Jebao so you can replace a dead Jebao around the 1 year mark. But they are cheap, so replacing once a year is no biggie!
|
#5
|
|||||
|
|||||
Exactly. I have a spare. But good PSA.
__________________
Brad |
#6
|
|||||
|
|||||
Hey guys, I have an old tunze I am not using because the mount broke. When I find it, I'll post it up and see if is something you guys can use.
__________________
- S H A O - |
#7
|
|||||
|
|||||
__________________
- S H A O - |
#8
|
|||||
|
|||||
Quote:
Does Apex do 0-5v or 0-10v? I tried setting the Profilux output to 0-5v as suggested, and they only ramped up about 1/2 way... but very quiet. Got home today and both the pumps had stopped again. Grrrrr |
#9
|
|||||
|
|||||
Sorry, honestly don't know. 0-10 sounds right, but I often make stuff up in my head
__________________
Brad |
#10
|
|||||
|
|||||
Just measured the output from the Jebao controller, it's 5v max.
Now the weird part. With the Profilux set to 0-10v I get 4.89v at the control circuit out to the pump. There must be a resistor in the adapter for the Profilux circuit. Temped to just hook them up to an old wave maker power bar. |