|
|
|
|
|
#1
02-07-2015, 02:04 PM
|
||||
|
||||
I'm running the Jebao DC-12000 on my 190g and it works great. I never run it on full power as I don't need that much flow from my return (could have done the DC-9000 as I really don't go past the 4 out of 6 speeds). I have it set up with 2 returns and 3 feeds into the sump, 1 of which goes into the fugue area. It's been 4 months so far, and I like it. I used a mag 18 on my last 130g and looked at the external reef flos for this build. I like the DC power adjustments and checked a few tanks before I bought mine. Nice and quite as well, which was a concern for me.
__________________
RSM 250. Clownfish, Fox face, Blue tang, Yellow tang, Kole tang, Clown tang, Coral beauty angel, French Angel, splendid dottyback. CUC, softies, lps, sps. 
|
|
#2
04-25-2015, 06:26 PM
|
|||||
|
|||||
|
While I am patiently awaiting, I have aquired a couple more pieces. Picked up a BRS Carbon/GFO reactor, grounding probe and sand.
Considering the Jabao DCT 12000 as a return pump with a split off to feed the reactor. The pump is oversized, I'm hoping it will keep it quieter and last longer as it won't be running at full power. Does anyone have any experience doing this? Input is much appreciated. Also thinking about the Jabao Dosing unit. The good thing about waiting this long for the tank is the rock has been cooking for 3 months now and should result in a short cycle!
|
Hybrid Mode
