![]() |
|
#1
|
||||
|
||||
![]() Quote:
![]() |
#2
|
|||||
|
|||||
![]() Been buying my IO from KE's pretty much from day 1. It's not a sale price but rather a continuing one
FWIW, my current bucket of IO is giving me 12.10, 470 and 1305, but only after a lot of rolling |
#3
|
|||||
|
|||||
![]() Personally I think saving 10 bucks to support a store that you feel gave you bad advice, and otherwise avoid, is not good reason. JMO
__________________
Brad |
#4
|
|||||
|
|||||
![]() Quote:
And heres why i switched back from H2Ocean, it used to be worse but I've been slowly chipping away at it ![]() Last edited by GoFish; 11-28-2014 at 03:14 AM. |
#5
|
|||||
|
|||||
![]() That looks like a calcium buildup. Save yourself the effort and use some vinegar or diluted muriatic acid.
Do you fill the bucket and circulate it then add salt mix? Are you using RO water?
__________________
www.oceanfreshaquarium.com/foz-down.html - Foz Down - an easy way to eliminate algae outbreaks caused by Phosphate and bring back the fun of reef keeping. |
#6
|
|||||
|
|||||
![]() I pour the dry salt in first then add either one or two 5 gallon jugs of RODI. Koralia powerhead and heater for at least 12 hours and up to 5 days before I'll throw it out
Could be calcium, I'll muraitic acid bath it tonight |
#7
|
||||
|
||||
![]() ALWAYS add salt to water, not the other way around. Adding water to salt means that it becomes highly concentrated almost instantly while pouring the water in, which causes precipitation of elements.
|
#8
|
|||||
|
|||||
![]() Like Tim, I've been using H2Ocean for several years now in my reef tanks for the same reason - it's derived from natural seasalt. I add Mg and K to H2Ocean and my testing has been very consistent with it. I used IO (and IO Reef Crystals) almost exclusively from 1993 to 2009 and I thought I was happy with it until I switched to H2Ocean. When I used IO I added Ca, Mg, and K. In my opinion, for the average reef aquarium IO is a perfectly fine salt to use. If your tank is PACKED with SPS corals (in particular), I think IO is sub-par. Having said that, I've seen AWESOME SPS tanks using almost every brand of salt out there. I don't think salt choice is the be all end all as long as you stick with one of the more major brands. In the end, I think it's more about parameters. If you want to keep alkalinity at 7-8 dKH, IO or IORC is a really poor choice because they have high alkalinity. If you want 9-10 dKH, then H2Ocean is not the best option.
I agree with this 100%. In my opinion, this is really the most significant part of this whole thread. Last edited by Myka; 11-29-2014 at 01:29 PM. |