Dougs Reef

[Doug]

[Doug]

Whats that Mike? I have 12mm glass cut to do my overflow and going to build a rock wall over the complete overflow instead of black acrylic..seeing as how I have enough rock to do a 200g tank. LOL.

[LoJack]

Originally Posted by HaZRaTTy

Yup darn noise durso!

When I ran my herbie I had a strainer on my main drain and had the other open. I the year I had the herbie I never had to clean the strainer once? I will add I never had a HA problem either. I diligently checked it on water change day but had no build up.


Good luck man, sorry for the Herbie/Durso war.

Thats the only thing I've ever had to clean out of mine. I get no algae in my tank, because I've got a handful of algae eaters that don't ever let it get a foot hold and my phosphates are usually just above zero, however, in the coast to coast overflow itself where there are no fish or snails, I get some green hair algae, and when it decides to let go ... it usually partially blocks the strainer.

Having that secondary pipe comes in super handy here though, and will on your setup as well Doug ... the bit of extra flow if a strainer becomes partially blocked is easily handled by the second drain, allowing you a safety net until you have an opportunity to notice it and get it cleaned out.

[Doug]

I should have just bought Denny,s when I was in Calgary and been done with it.....

[Doug]

Ha Ha. Now I do a Dubeherbie gurgle buster or something...

So I borrowed a bit for a 1in bulkhead. So dull it took me an hour but all good, except little scratch from start up and tiny flake out on the outside. I was going to do another but cant got through that again. Im still shaking...

I now have a 1in. and two 3/4 in. Should be able to do something with that, no?

[Doug]

I have the new drilled bulkhead out the back done with a 1in. duraso type stack as shown for the bean overflow. This will be my main flow stack. One of the 3/4in, will have the Duraso style but just a hair higher and with the air tube assembly. The third is a straight 1in stack and the highest as an emergency flow. Of course as mentioned before its still only a 3/4in through the bottom.

Finished my over flow glass.It will be topped with eggcrate as all my tanks have always been.

Pics this weekend. Bought 2 more lengths of 1 in. pipe and a length of 3/4 in for the return. AND $80 worth of elbows, valve, unions and the such.

[StirCrazy]

Originally Posted by Doug

Pics this weekend. Bought 2 more lengths of 1 in. pipe and a length of 3/4 in for the return. AND $80 worth of elbows, valve, unions and the such.

you need to snoop throught my fitting bins befor you buy stuff

Steve

[Doug]

Originally Posted by StirCrazy

you need to snoop throught my fitting bins befor you buy stuff

Steve

I already bought it.