|
|
|
|
|
#2
11-18-2013, 07:52 PM
|
|||||
|
|||||
  Ha Ha. Now I do a Dubeherbie gurgle buster or something...  So I borrowed a bit for a 1in bulkhead. So dull it took me an hour but all good, except little scratch from start up and tiny flake out on the outside. I was going to do another but cant got through that again. Im still shaking... I now have a 1in. and two 3/4 in. Should be able to do something with that, no?
__________________
Doug Last edited by Doug; 11-23-2013 at 03:49 AM. 
|
|
#3
11-23-2013, 03:38 AM
|
|||||
|
|||||
|
I have the new drilled bulkhead out the back done with a 1in. duraso type stack as shown for the bean overflow. This will be my main flow stack. One of the 3/4in, will have the Duraso style but just a hair higher and with the air tube assembly. The third is a straight 1in stack and the highest as an emergency flow. Of course as mentioned before its still only a 3/4in through the bottom.
Finished my over flow glass.It will be topped with eggcrate as all my tanks have always been. Pics this weekend. Bought 2 more lengths of 1 in. pipe and a length of 3/4 in for the return. AND $80 worth of elbows, valve, unions and the such.
__________________
Doug
|
Hybrid Mode
