RO/DI QUESTION

[mike31154]

Originally Posted by Fesso

Agreed.

You should really consider a unit that has a booster pump. With the booster pump you get water faster with waaaaay less waste. Also the booster pump will extend the life for the filters.

As mentioned in my earlier post, if you find the PRV in your house, you can usually bump up the pressure. Imagine, free pressure boost from the city, which you are already paying for through your utility bill. If you can do this, why fork out the extra $$ for another add on to your RODI unit with more potential for leaks or other failures? Hook a pressure guage to your water line downstream of the PRV & adjust to 90 psi. I've had mine a shade over that at just over 100 psi for several years no problem, although BFS recommends you not exceed 90 psi. Performance & efficiency of membrane is increased, as is your rate of pure water output.

http://www.buckeyefieldsupply.com/FAQ.asp#FAQ21

[Magickiwi]

I ordered a SpectraPure unit from Reefsupplies.ca

Click me here baby...

There may have been better deals out there or better units but I have a media reactor from SpectraPure that works great so I trust the brand.