![]() |
|
#1
|
|||||
|
|||||
![]() I understand stability is important, and I realise adding a higher mineral content during water changes is beneficial
But my readings aren't stable, and the salt is adding too much Ca The IO Salt readings aren't balanced @ Ca 480 the Alk should be over 14dKH, not 10.5 The Ca is not being used up @ the same rate as the Alk, and it's climbing June 19 Alk 7.5-8.0 Ca 410 July 7 Alk 7.5 Ca 440-450 I'll keep an eye on it over the next week or two and, if it keeps rising, I'll dose a little Reef Builder ( Alk ) to balance them out And, ya, I rolled the crap out of the bucket before I opened it ![]() |
#2
|
||||
|
||||
![]() Well there you go. That's the problem. You bought a bucket of crap.
![]() Have been using IO and so have a lot of other reefers I know for years.
__________________
If you see it, can take care of it, better get it or put it on hold. Otherwise, it'll be gone & you'll regret it! |
#3
|
|||||
|
|||||
![]() ![]() I know lots use it, and that's why I buy it I've also heard that over this last x-mas, some had batches that were out of balance As I said, I'll just keep an eye on it and hope my Ca doesn't get too much higher |