Ecotech Marine’s Radion XR30w wins the 2011 Reef Builders LED showdown

[MarkoD]

Why am I having different results with my radion. A month with ai sols and everything was good. I put a radion on the right sideof my tank and kept ai sols on the left. I have my sols at 90% power and radion at 65% and wall my Zoe's under the radion have been closed for about a week now. I can't even tell if they're alive.

Last night i put radion on the far left and moved a sol to the far right. I'm gonna give it a week to see if anything rebounds

Originally Posted by zoaElite

I agree with the whole BS Reef Builders scandal, regardless I own 6 of the Radions and have had improved growth in color over the last 2 months (compared to my halides/t5 combo). Marko your seriously wrong on your interpretation of peoples reactions, again like previously stated if I dropped 5 grand on lighting and thought it was garbage I would not hesitate to say so.

The results speak for themselves, these are on the sand bed of my 22" tank with the Radions mounted about 8" above the surface.

Honestly I'm jealous of your tank and your results. But can not recreate the same results with my radion

Got these paly's on 11-03-2011, added the Radions about 3 days after this.


This is a 2 month growth shot.


Take a look at the back ground corals too, easy to notice growth all around.

[MarkoD]

Also I never intended to come across as saying that radions are garbage. I'm just saying that from my limited experience I've noticed more benefit from 2 ai sols than with 1 radion

[unclesalty]

Originally Posted by MarkoD

Also I never intended to come across as saying that radions are garbage. I'm just saying that from my limited experience I've noticed more benefit from 2 ai sols than with 1 radion

I am not saying AI are garbage either. I was going to go with Vertex Illumina or AI until the Radions came into the picture and myself like many others prefer the Radion over the AI. Different strokes for different folks I guess one could say.

[cale262]

Originally Posted by MarkoD

Why am I having different results with my radion. A month with ai sols and everything was good. I put a radion on the right sideof my tank and kept ai sols on the left. I have my sols at 90% power and radion at 65% and wall my Zoe's under the radion have been closed for about a week now. I can't even tell if they're alive.

Last night i put radion on the far left and moved a sol to the far right. I'm gonna give it a week to see if anything rebounds

Maybe you have too much light coming from the Radion?...I went from a 200W PS BP LED fixture, to the two Radions...I ran the PS @ 90%, I put the Radions over the tank initially at 90% @ the same height and burnt a couple coral right away...I now run My Radions at a max Of 60% for about 3 hrs a day... everything is growing fast and happy.

[MarkoD]

Originally Posted by cale262

Maybe you have too much light coming from the Radion?...I went from a 200W PS BP LED fixture, to the two Radions...I ran the PS @ 90%, I put the Radions over the tank initially at 90% @ the same height and burnt a couple coral right away...I now run My Radions at a max Of 60% for about 3 hrs a day... everything is growing fast and happy.

Before any LEDs I had 4x250 mh and 4x 39 t5

[cale262]

Originally Posted by MarkoD

Before any LEDs I had 4x250 mh and 4x 39 t5

I was also running 250w MH and T5 before switching to the PS LED,...I started the PS fixture @ 50% and slowly worked my way up to the 90%...then I assumed the Radion was less W Than the PS and there should be no shock when switching the two LED fixtures as previously stated above...I was wrong... LED's are really new in this hobby and from what I have read, we are making a mistake by measuring LED fixtures with PAR....PAR undergrades the blue light spectrums and focus's more on the white/yellows...Higher end LED's used for reef lighting have no yellow as fould in traditional lighting (MH, T5, PC etc) thus measuring in PAR is old tech and not the correct tool for the job when measuring LED...this is also why less expensive 1W LED show more PAR, they have more yellow spectrum to measure yet this yellow is not usable light in reef corals...I think we'll see more about PUR (as oposed to PAR) as the LED fixtures become more common place in this hobby...


Stolen quote:

PUR (Photosynthetically Usable Radiation) also known as "Useful Light Energy" is what concerns us as aquarium keepers even considerably more than PAR in providing correct lighting (yet provides a lot of confusion, especially when considering LED Lights).
PUR is that fraction of PAR that is absorbed by zooxanthellae photopigments thereby stimulating photosynthesis. As noted above, PUR are those wavelengths falling between 400-550nm and 620-740nm.
Generally a Spectrograph is used to rate PUR (these are much more expensive than a PAR meter, with the result of many falsely considering PAR and ignoring the more important PUR.)

[Nano]

Originally Posted by cale262

I was also running 250w MH and T5 before switching to the PS LED,...I started the PS fixture @ 50% and slowly worked my way up to the 90%...then I assumed the Radion was less W Than the PS and there should be no shock when switching the two LED fixtures as previously stated above...I was wrong... LED's are really new in this hobby and from what I have read, we are making a mistake by measuring LED fixtures with PAR....PAR undergrades the blue light spectrums and focus's more on the white/yellows...Higher end LED's used for reef lighting have no yellow as fould in traditional lighting (MH, T5, PC etc) thus measuring in PAR is old tech and not the correct tool for the job when measuring LED...this is also why less expensive 1W LED show more PAR, they have more yellow spectrum to measure yet this yellow is not usable light in reef corals...I think we'll see more about PUR (as oposed to PAR) as the LED fixtures become more common place in this hobby...


Stolen quote:

So how do you really measure the light then if par is irrelevant? I am just wondering cause I am getting an AI for my new tank, and going from t5's to AI will be a huge change, I know I have to start it low, but how low is low lol? might seem like a dumb question

[Skimmerking]

Boys what about reef tech and this python led pendant are they any good

[cale262]

Originally Posted by asmodeus

Boys what about reef tech and this python led pendant are they any good

Reeftech was a big letdown as they never came through with the software as promised...

I was happy with the Python right up to the point where it started having driver issues...no assistance was given by the distributor to get any warranty work doen, so no more euro-junk for me...the PS is now an $1800 paper weight.

This was the big drive to buy a North American product and ecotech has a strong name and rep, I believe even if the Canadian distributor flakes out on me again, at least I don't have to worry about Ecotech leaving me stranded as Pacific Sun did. I also don't have to deal with the English/Polish language barrier which was extremely frustrating when communicating with both PS and RT.

[Nano]

Hey marko what are the odds of taking the same kind of shots you did, only use the AI sol on say the left side again, and the for the Comparison, use the Radion on the left side as well, then you can see a direct difference