#1
|
|||||
|
|||||
PVC threaded pipe sealant
What is being used these days for sealing pvc pipe threads?
I have used teflon tape or silicone caulking in the past with good results, but I see where the instructions on my Sequence Dart pump recommends using Teflon pipe dope (the white paste). Which works best?
__________________
Mitch |
#2
|
|||||
|
|||||
I've always used teflon tape. Never had a leak...
__________________
Brad |
#3
|
|||||
|
|||||
yup teflon tape or silicone.
Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one* Some strive to be perfect.... I just strive. |
#4
|
|||||
|
|||||
The teflon paste is just like the tape when it hardens, i used to use it at work a lot because it was faster than taping. Works well on some super high pressure fittings, should be no problem for a low pressure system. I used tape on all my dart fittings and have no leaks from the fittings. The shaft seal... well that's my project this weekend.
__________________
My 150 In Wall Build |